2002 Toyota Mark II Wagon Blit 2.0 IR Specs


OVERVIEW

With a fuel consumption of 26.7 mpg US - 32.1 mpg UK - 8.8 L/100km, a weight of 3240 lbs (1470 kg), the Toyota Mark II Wagon Blit 2.0 IR has a water cooling 6 cylinder vertical DOHC engine, a Regular gasoline engine 1G-FE. This engine 1G-FE produces a maximum power of 162.2 PS (160 bhp - 119.3 kW) at 6200 rpm and a maximum torque of 200 Nm (147.5 lb.ft - 20.4 kg.m) at 4400 rpm. The engine power is transmitted to the road by the rear wheel drive (FR) with a 4AT gearbox. For stopping power, the Toyota Mark II Wagon Blit 2.0 IR braking system includes Disk at the rear and Ventilated disk at the front. Stock tire sizes are 195/65 on 15 inch rims 91H at the rear and 195/65 on 15 inch rims 91H at the front. Chassis details - Toyota Mark II Wagon Blit 2.0 IR has double wishbone coil spring rear suspension and double wishbone coil spring front suspension for road holding and ride confort.

Add to compare list

GENERAL INFORMATION
Complectation Name2.0 IR
Period of ProductionJan 2002 - Nov 2003
Drive Wheels - Traction - DrivetrainFR
Body TypeWagon
Transmission Gearbox - Number of Speeds4AT
Engine Size - Displacement - Engine Capacity1988 cm3 or 121.3 cu-in
Frame NameTA-GX110W
Price of New Car in Tokyo, Yen2480000

TOYOTA MARK II WAGON BLIT 2.0 IR SIZE, DIMENSIONS AND WEIGHT
Exterior Length477.5 cm or 187.99 inches
Exterior Width176 cm or 69.29 inches
Exterior Height147 cm or 57.87 inches
Interior Length195 cm or 76.77 inches
Interior Width148 cm or 58.26 inches
Interior Height119.5 cm or 47.04 inches
Wheelbase278 cm or 109.44 inches
Front Axle Length149.5 cm or 58.85 inches
Rear Axle Length147.5 cm or 58.07 inches
Ride Height - Ground Clearance15.5 cm or 6.1 inches
Weight1470 kg or 3240 lbs
Num. of Seats5
Num. of Doors5
Minimum Turning Circle - Turning Diameter, m5.3
Fuel Tank Capacity18.4 US gallons
15.3 UK gallons
70 L

TOYOTA MARK II WAGON BLIT 2.0 IR ENGINE TECHNICAL DATA
Engine Code1G-FE
Maximum Power - Output - Horsepower162.2 PS or 160 bhp or 119.3 kW
Maximum Power RPM6200 rpm
Maximum Torque200 Nm or 147.5 lb.ft or 20.4 kg.m
Maximum Torque RPM4400 rpm
Engine Type - Number of Cylinderswater cooling 6 cylinder vertical DOHC
Engine Additional InfoVariable valve timing system
Fuel TypeRegular gasoline
LEVSuper low exhaust vehicle (G-LEV )
Fuel Consumption (10/15 mode)26.7 mpg US
32.1 mpg UK
8.8 L/100km
1st Gear Ratio2.45
2nd Gear Ratio1.45
3rd Gear Ratio1
4th Fear Ratio0.688
Rear Gear Ratio2.222
Compression Ratio10
Bore7.5 cm or 2.95 inches
Stroke7.5 cm or 2.95 inches

TOYOTA MARK II WAGON BLIT 2.0 IR SUSPENSION
Front Brakes - Disc DimensionsVentilated disk
Rear Brakes - Disс DimensionsDisk
Front Suspensiondouble wishbone coil spring
Rear Suspensiondouble wishbone coil spring
Front Tyres - Rims Dimensions195/65 R15 91H
Rear Tyres - Rims Dimensions195/65 R15 91H
Tyres - Rims Dimensions205 / 55 R16 89V

TOYOTA MARK II WAGON BLIT 2.0 IR EXTERIOR
SunroofNo
Tilt SunroofOption
Twin SunroofNo
Front SpoilerNo
Rear SpoilerStandart
Power Adjustable Door MirrorsStandart
Xenon LampsStandart
Front Fog LampsStandart
Rear Fog LampsOption
Cornering LampsNo
Ultraviolet Glass ProtectionStandart
Roof RailStandart
Back WiperStandart

TOYOTA MARK II WAGON BLIT 2.0 IR INTERIOR
Power WindowStandart
Power SteeringStandart
TachometerStandart
Centralized Door LockStandart
Keyless EnterStandart
Right Hand DriveStandart
Left Hand DriveNo
Leather WindingStandart
Adjustable SteeringStandart
Telescopic SteeringNo
Tilt SteeringStandart
Wood PanelNo
Cruise ControlNo
Leather SeatNo
Power Adjustable SeatsNo
Power Ajustable Front SeatNo
Power Ajustable Back SeatNo
Reclining SeatsNo
Removable SeatsStandart
Turning SeatsNo

TOYOTA MARK II WAGON BLIT 2.0 IR SAFETY
Drivers AirbagStandart
Passengers AirbagStandart
Side AirbagOption
Side Impact BarStandart
TCSNo
Break AssistStandart
Parking RadarNo
Central Power Window ControlStandart
Additional Stop LightStandart
Safety Belt PretensionerStandart
Safety Belt LimiterStandart
3 Point Safety BeltStandart
Child Car RestraintsStandart
Durable FrameStandart

AMENITY
CoolerNo
Automatic Air ConditioningStandart
Twin Conditioning SystemNo
Air PurifierNo
RadioStandart
Autoreverse CasetteStandart
CD PlayerStandart
CD ChangerOption
MD PalyerOption
MD ChangerNo

OTHER
LSDNo
Front StabilizerStandart
Rear StablilizerStandart
Special EquipmentNo


- Present
- Option
- Not Present (or Dealer Option)



More photos Toyota Mark II Wagon Blit


By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on March 28, 2024
πŸ“Œ Introduction
πŸ“Œ Model Overview
πŸ“Œ Production Years
πŸ“Œ Generations
πŸ“Œ Engine Specifications
πŸ“Œ Engine Code
πŸ“Œ Fuel Efficiency
πŸ“Œ Fuel Consumption
πŸ“Œ Fuel Tank Capacity
πŸ“Œ Dimensions and Sizes
πŸ“Œ Wheel Specifications
πŸ“Œ Trim Levels
πŸ“Œ Interior Features
πŸ“Œ Conclusion

Introduction

The 2002-2003 Toyota Mark II Wagon Blit 2.0 IR, a remarkable vehicle in its time, exudes a blend of elegance and practicality. This period saw Toyota creating a wagon that resonated with both families and individuals seeking comfort and performance. The "2.0 IR" complectation was characterized by its Front-Engine Rear-Wheel Drive (FR) configuration, which contributed to its agile handling and dynamic driving experience. With a body type classified as a wagon, it catered to those valuing versatility without compromising on style.

Equipped with a 4-speed Automatic Transmission (4AT), the 2.0 IR model sported a 1988 cm3 engine, the 1G-FE. This inline-6 engine's power output reached up to 162.2 PS or 160 bhp, complemented by a maximum torque of 200 Nm at 4400 rpm. Notably, the 1G-FE engine featured a Variable Valve Timing system, enhancing its efficiency across different driving conditions.

The exterior dimensions of the Mark II Wagon Blit 2.0 IR emphasized a balance between spaciousness and maneuverability. Its exterior length extended to 477.5 cm, while the interior provided ample space with an interior length of 195 cm. The vehicle's width and height measured 176 cm and 147 cm, respectively, contributing to a comfortable interior layout.

Inside the cabin, the 2.0 IR featured power windows, power steering, and centralized door locks as standard, enhancing convenience. Safety considerations included standard driver and passenger airbags, a side impact bar, and safety belt pretensioners. The presence of xenon lamps, front fog lamps, and UV glass protection highlighted attention to both aesthetics and safety.

The 2002-2003 Toyota Mark II Wagon Blit 2.0 IR was a blend of functionality and style, offering a reliable and enjoyable driving experience. Whether navigating urban streets or embarking on longer journeys, this model aimed to cater to the diverse needs of drivers and passengers alike.

Model Overview

The 2002-2003 Toyota Mark II Wagon Blit 2.0 IR represents a harmonious blend of performance, practicality, and style within the Mark II lineup. As a wagon variant, it caters to the demands of those who prioritize both ample space and driving pleasure. With its "2.0 IR" complectation, this model aimed to provide an enhanced driving experience through its well-balanced specifications and features.

Toyota's focus on precision engineering and design is evident in the 2.0 IR's Front-Engine Rear-Wheel Drive (FR) configuration. This layout contributes to its dynamic handling and responsiveness on the road. The vehicle's streamlined body type as a wagon showcases its versatility Γ’β‚¬β€œ ideal for families, individuals, and those with an active lifestyle.

Under the hood, the 2.0 IR is powered by the capable 1G-FE engine, an inline-6 powerplant that combines performance and efficiency. The Variable Valve Timing system within this engine ensures optimal power delivery across various driving scenarios. Mated to a 4-speed Automatic Transmission (4AT), the 2.0 IR offers a smooth and convenient driving experience, making it suitable for both city commutes and longer journeys.

Safety and comfort have been taken into consideration, evident through standard features such as power windows, power steering, and centralized door locking. The inclusion of driver and passenger airbags, a side impact bar, and safety belt pretensioners underscores Toyota's commitment to safety.

The 2002-2003 Toyota Mark II Wagon Blit 2.0 IR embodies Toyota's dedication to engineering excellence and driver satisfaction. By providing a well-rounded package that encompasses performance, safety, and comfort, the 2.0 IR presents a compelling option for those seeking a vehicle that seamlessly adapts to their lifestyle and driving preferences.

Production Years

The 2002-2003 Toyota Mark II Wagon Blit 2.0 IR had a production run that spanned from January 2002 to November 2003. During this period, Toyota crafted a vehicle that embodied their commitment to excellence and innovation. The 2.0 IR model, nestled within the Mark II lineup, represented a specific phase in Toyota's design and engineering evolution.

The production years of the 2.0 IR coincided with a time when Toyota was focused on creating vehicles that seamlessly combined practicality and performance. The years 2002 and 2003 saw the automotive landscape evolving, with customers increasingly seeking vehicles that offered both comfort for everyday use and the thrill of driving.

Toyota's attention to detail during the production years is evident in the carefully curated features and specifications of the 2.0 IR. From its FR drivetrain configuration to its inline-6 engine and 4-speed automatic transmission, every aspect of the vehicle was designed to provide a harmonious driving experience. These production years marked a continuation of Toyota's dedication to crafting vehicles that resonate with a diverse range of drivers, ensuring that the 2.0 IR found its place among a dynamic automotive market.

Generations

The 2002-2003 Toyota Mark II Wagon Blit 2.0 IR belongs to the second generation of the Mark II Wagon Blit lineup. This generation, characterized by its refined design and upgraded features, aimed to build upon the successes of its predecessor while incorporating advancements that aligned with evolving automotive trends.

The second generation brought forth a continuation of Toyota's commitment to performance, comfort, and innovation. The 2.0 IR model, specifically, showcased Toyota's prowess in engineering, offering a blend of power and efficiency through its inline-6 engine and drivetrain configuration.

The exterior design of the second-generation Mark II Wagon Blit 2.0 IR reflected Toyota's dedication to creating vehicles that are not only functional but also aesthetically pleasing. The body proportions were carefully crafted to ensure a harmonious blend of spaciousness and agility, catering to a diverse range of drivers' needs.

Inside the cabin, advancements in technology and comfort were evident. With features like power windows, power steering, and centralized door locking, the second-generation 2.0 IR embraced convenience for both the driver and passengers. Safety considerations were also enhanced, as seen through the inclusion of airbags and other safety features that were becoming more standard in vehicles of this era.

The second generation of the Mark II Wagon Blit 2.0 IR represents Toyota's dedication to continuous improvement and adaptation. By refining existing features and incorporating new technologies, Toyota aimed to provide drivers with a vehicle that was not only reliable and practical but also aligned with the changing expectations of the automotive landscape.

Engine Specifications

The heart of the 2002-2003 Toyota Mark II Wagon Blit 2.0 IR lies within its meticulously engineered engine. At its core is the 1G-FE engine, a testament to Toyota's commitment to performance and efficiency. This inline-6 engine, with a displacement of 1988 cm3, forms the backbone of the 2.0 IR's driving experience.

One standout feature of the 1G-FE engine is its Variable Valve Timing system, a technological innovation that optimizes valve timing for improved power delivery and fuel efficiency across different driving scenarios. This system ensures that the engine operates optimally at both low and high RPMs, striking a balance between performance and economy.

The engine's maximum power output of 162.2 PS or 160 bhp is achieved at 6200 rpm, showcasing its ability to deliver spirited acceleration when needed. Complementing this power is a maximum torque of 200 Nm at 4400 rpm, providing a responsive and versatile driving experience.

Toyota's focus on environmental responsibility is evident in the 1G-FE engine's classification as a Super Low Emission Vehicle (SULEV). This aligns with the industry's growing emphasis on reducing emissions and minimizing the carbon footprint of vehicles.

With a compression ratio of 10:1, the 1G-FE engine strikes a balance between power and efficiency. The bore and stroke of 7.5 cm each contribute to the engine's overall performance characteristics, ensuring a harmonious blend of power delivery and smooth operation.

The 2002-2003 Toyota Mark II Wagon Blit 2.0 IR's engine exemplifies Toyota's dedication to innovation, efficiency, and performance. By combining advanced technologies and meticulous engineering, Toyota crafted an engine that not only met the demands of its time but also contributed to an enjoyable and responsible driving experience.

Engine Code

The 2002-2003 Toyota Mark II Wagon Blit 2.0 IR is propelled by the capable 1G-FE engine, an engine code that carries a legacy of performance and reliability. This alphanumeric code serves as an identifier for the engine model used in this particular variant.

The "1G" in the engine code signifies the engine family, offering insights into the broader category of engines that share similar design and technological characteristics. The specific "FE" designation provides additional information about the engine's configuration and features.

The engine code not only serves as a technical identifier but also encapsulates the engineering excellence and expertise that Toyota invests in its powerplants. The 1G-FE engine, known for its smooth power delivery and efficient performance, has become synonymous with the Toyota brand's commitment to creating vehicles that deliver both driving pleasure and practicality.

Behind the alphanumeric engine code lies a wealth of design, technology, and innovation that culminate in the driving experience of the 2002-2003 Toyota Mark II Wagon Blit 2.0 IR. This engine code is a testament to Toyota's dedication to precision engineering and its quest to provide drivers with vehicles that excel in both performance and reliability.

Fuel Efficiency

The 2002-2003 Toyota Mark II Wagon Blit 2.0 IR presents a compelling proposition in terms of fuel efficiency, reflecting Toyota's commitment to responsible and economical driving. The engineers at Toyota paid meticulous attention to the vehicle's fuel consumption characteristics, resulting in a model that strikes a balance between performance and frugality.

Equipped with the 1G-FE engine, the 2.0 IR embodies Toyota's approach to optimizing fuel efficiency without compromising on power. This inline-6 engine incorporates a Variable Valve Timing system that adjusts valve timing to suit various driving conditions, contributing to efficient combustion and improved mileage.

In standardized fuel consumption tests, the 2.0 IR achieved a commendable fuel efficiency figure. This figure, expressed in miles per gallon (mpg) or liters per 100 kilometers (L/100km), underscores the vehicle's ability to cover more distance on less fuel. The efficient engineering of the engine, in conjunction with other factors such as aerodynamics and weight distribution, contributes to the overall fuel economy of the vehicle.

Toyota's focus on environmentally friendly technologies is evident in the classification of the 2.0 IR as a Super Low Emission Vehicle (SULEV), indicating compliance with stringent emission standards. This not only reflects Toyota's commitment to reducing the environmental impact of its vehicles but also aligns with the growing societal awareness of ecological sustainability.

The 2002-2003 Toyota Mark II Wagon Blit 2.0 IR embodies the intersection of performance and fuel efficiency. Through careful engineering and technological innovation, Toyota created a vehicle that satisfies the desires of drivers seeking an economical yet enjoyable driving experience.

Fuel Consumption

The 2002-2003 Toyota Mark II Wagon Blit 2.0 IR is designed with fuel efficiency in mind, reflecting Toyota's commitment to optimizing driving performance while minimizing fuel consumption. The model's fuel consumption data underscores its economical nature, making it an appealing choice for both urban commuting and longer journeys.

The combination of the 1G-FE engine's engineering excellence and the vehicle's overall design contributes to its commendable fuel consumption figures. The 2.0 IR underwent standardized fuel consumption tests, which yielded measurements in miles per gallon (mpg) or liters per 100 kilometers (L/100km). These figures highlight the amount of fuel required to travel a specific distance, offering valuable insights into the vehicle's efficiency.

Toyota's dedication to environmental responsibility is evident through the 2.0 IR's classification as a Super Low Emission Vehicle (SULEV), indicating that it meets stringent emission standards. This aligns with Toyota's broader commitment to reducing the carbon footprint of its vehicles and contributing to a more sustainable future.

When considering fuel consumption, it's important to remember that driving habits, road conditions, and maintenance practices also play a role in a vehicle's overall efficiency. By offering a model like the 2.0 IR with its efficient engine and thoughtfully designed features, Toyota caters to individuals who seek not only a reliable and enjoyable driving experience but also one that aligns with responsible fuel consumption practices.

Fuel Tank Capacity

The 2002-2003 Toyota Mark II Wagon Blit 2.0 IR comes equipped with a thoughtfully designed fuel tank that strikes a balance between capacity and practicality. The fuel tank capacity of a vehicle is an essential consideration, as it determines the distance a driver can travel before refueling becomes necessary.

The fuel tank of the 2.0 IR is designed to accommodate a specific volume of fuel, usually measured in gallons or liters. This capacity allows the vehicle to cover a considerable distance before requiring a visit to the gas station. With the 2.0 IR's focus on efficiency and performance, the fuel tank capacity ensures that drivers can enjoy longer drives without frequent stops for refueling.

The 2.0 IR's fuel tank capacity is an integral component of its overall design, influencing factors such as the vehicle's range and the convenience it offers to drivers. By optimizing the balance between fuel tank capacity and fuel consumption, Toyota delivers a vehicle that aligns with the diverse needs of its drivers, whether for daily commuting or extended road trips.

Dimensions and Sizes

The 2002-2003 Toyota Mark II Wagon Blit 2.0 IR showcases a well-balanced approach to dimensions and sizes, catering to both interior spaciousness and exterior maneuverability. The careful consideration given to these aspects reflects Toyota's commitment to providing a vehicle that meets the diverse needs of its drivers.

The exterior dimensions of the 2.0 IR contribute to its road presence and practicality. With an exterior length of 477.5 cm, width of 176 cm, and height of 147 cm, the vehicle strikes a harmonious balance between size and agility. These dimensions allow the 2.0 IR to navigate urban environments and parking spaces with ease, while still offering ample space for passengers and cargo.

Inside the cabin, the dimensions and sizes have been optimized for comfort and usability. The interior length of 195 cm and width of 148 cm ensure a spacious interior layout, providing both driver and passengers with ample room to relax during journeys. The interior height of 119.5 cm contributes to an open and airy feel, enhancing the overall comfort of the vehicle.

The wheelbase of the 2.0 IR measures 278 cm, a dimension that influences factors such as stability and ride quality. Additionally, the front and rear axle lengths, along with the ride height or ground clearance of 15.5 cm, contribute to the vehicle's overall stance and road manners.

By meticulously designing the dimensions and sizes of the 2002-2003 Toyota Mark II Wagon Blit 2.0 IR, Toyota delivers a vehicle that offers the best of both worlds: practical exterior dimensions for urban driving and spacious interior dimensions for a comfortable and enjoyable experience on the road.

Wheel Specifications

The 2002-2003 Toyota Mark II Wagon Blit 2.0 IR comes equipped with carefully chosen wheel specifications that contribute to its overall driving dynamics and aesthetics. The selection of wheel dimensions and types plays a significant role in defining the vehicle's handling, ride quality, and visual appeal.

The front and rear wheels of the 2.0 IR feature specifications that are designed to work in harmony with the vehicle's overall configuration. These specifications, including tire dimensions and rim sizes, have been carefully chosen to strike a balance between comfort and performance.

The front tires of the 2.0 IR are fitted with 195/65 R15 91H tires, while the rear tires also share the same specifications. These tire dimensions reflect a blend of traction, comfort, and efficiency, catering to the vehicle's versatility and driving characteristics.

Additionally, the 2.0 IR offers an alternative set of wheel specifications in the form of 205/55 R16 89V tires. This option provides drivers with the opportunity to customize their vehicle's performance and appearance to better suit their preferences.

Wheel specifications influence various aspects of the driving experience, including grip, stability, and overall road manners. By carefully selecting and offering multiple options, Toyota allows drivers to tailor the 2002-2003 Toyota Mark II Wagon Blit 2.0 IR to their desired balance between comfort and performance.

Trim Levels

The 2002-2003 Toyota Mark II Wagon Blit 2.0 IR was offered in a range of thoughtfully crafted trim levels, each catering to different preferences and needs of drivers. These trim levels were designed to enhance the vehicle's features and appearance, allowing drivers to choose a model that best aligned with their lifestyle and driving preferences.

While specific details regarding individual trim levels are not provided, it's common for Toyota to offer a variety of options that may include variations in interior features, exterior styling, technology offerings, and additional convenience options. Trim levels allow drivers to personalize their vehicles, selecting the combination of features that matter most to them.

Toyota's commitment to quality and innovation extends to each trim level, ensuring that regardless of the chosen model, drivers can expect a high level of craftsmanship, reliability, and driving enjoyment. From basic features to more advanced amenities, the range of trim levels for the 2002-2003 Toyota Mark II Wagon Blit 2.0 IR reflects Toyota's dedication to providing a vehicle that meets a diverse array of preferences and demands.

Interior Features

The 2002-2003 Toyota Mark II Wagon Blit 2.0 IR offers a range of well-designed interior features that enhance comfort, convenience, and overall driving experience. Toyota's attention to detail is evident in the thoughtfully incorporated amenities that cater to both the driver and passengers.

Standard power windows and power steering are included in the 2.0 IR's interior features, providing ease of use and convenience for occupants. Centralized door locking ensures security while simplifying access to the vehicle.

The inclusion of a tachometer offers drivers insights into the engine's performance, aiding in smooth gear transitions and efficient driving. Additionally, the availability of a keyless entry system enhances convenience, allowing drivers to unlock and start the vehicle without fumbling for keys.

Toyota's commitment to ergonomic design is evident in features like adjustable steering, which enables drivers to find their optimal driving position. The 2.0 IR also features a power-adjustable driver's seat, allowing for personalized comfort during journeys.

While specific details of interior materials and finishes are not provided, it's typical of Toyota to prioritize quality materials that contribute to a refined cabin ambiance. Additionally, the interior features of the 2.0 IR may include options for upgraded upholstery and trim, enhancing the vehicle's visual appeal and comfort.

Overall, the 2002-2003 Toyota Mark II Wagon Blit 2.0 IR's interior features reflect Toyota's commitment to creating a comfortable, user-friendly, and enjoyable environment for both drivers and passengers.

Conclusion

The 2002-2003 Toyota Mark II Wagon Blit 2.0 IR stands as a testament to Toyota's unwavering dedication to engineering excellence, performance, and innovation. This model exemplifies the careful balance that Toyota strikes between practicality and driving pleasure, offering a vehicle that caters to diverse preferences and needs.

From its well-crafted dimensions that enhance maneuverability and interior space, to its meticulously designed engine specifications that prioritize efficiency and power, the 2.0 IR encapsulates Toyota's commitment to precision engineering. The vehicle's status as a Super Low Emission Vehicle (SULEV) underlines Toyota's dedication to environmental responsibility.

Inside the cabin, thoughtful interior features provide comfort and convenience for both drivers and passengers. Toyota's focus on safety is evident through the inclusion of airbags, safety belts, and impact-absorbing features that contribute to overall occupant protection.

The 2002-2003 Toyota Mark II Wagon Blit 2.0 IR's role within the second generation of the Mark II lineup highlights Toyota's ongoing pursuit of improvement and innovation. As a vehicle that merges practicality with performance, the 2.0 IR appeals to a wide range of drivers, whether seeking an efficient daily commuter or a vehicle for family adventures.

Ultimately, the 2.0 IR serves as a reminder of Toyota's legacy of creating vehicles that go beyond transportation, offering a holistic driving experience that aligns with modern expectations and demands. Through its dimensions, engine specifications, features, and overall design, the 2002-2003 Toyota Mark II Wagon Blit 2.0 IR stands as a testament to Toyota's commitment to excellence.

Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.

Add Comment

 * - The field should be filled
* Your Name:
 Contact (e-mail, phone...):
* Comments:
Photos:


 


Toyota Mark II Wagon Blit Problems

ComplaintDescriptionName and LocationPhoto
gas2002 Toyota Mark II Wagon Blitrosario
Suriname, Paramaribo
How many km does 1liter of gas go
need back lamp of left side2002 Toyota Mark II Wagon Blit
3 comments
malekulashter
Tanzania, United Republic of, morogoro
Hellow the problem of the car is its been knocked from the backside so i need to get a pair of two back lights and i would also like to know the price for its orignal head lamps and spark nplugs and its air cleaner please would be very thankfull and appreciate for it.