1995 Toyota Sprinter 2.0D SE Vintage Specs

OVERVIEW

With a fuel consumption of 61.8 mpg US - 74.3 mpg UK - 3.8 L/100km, a weight of 2380 lbs (1080 kg), the Toyota Sprinter 2.0D SE Vintage has a water cooling 4 cylinder SOHC engine, a Light oil engine 2C-III. This engine 2C-III produces a maximum power of 74 PS (73 bhp - 54.4 kW) at 4700 rpm and a maximum torque of 129.4 Nm (95.4 lb.ft - 13.2 kg.m) at 2800 rpm. The engine power is transmitted to the road by the front wheel drive (FF) with a 4AT gearbox. For stopping power, the Toyota Sprinter 2.0D SE Vintage braking system includes Leading trailing drum brake at the rear and Ventilated disk at the front. Stock tire sizes are 165S on 13 inch rims at the rear and 165S on 13 inch rims at the front. Chassis details - Toyota Sprinter 2.0D SE Vintage has strut coil spring rear suspension and strut coil spring front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Sprinter Specs Database

More photos Toyota Sprinter

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 23, 2024

Introduction

The 1995-1996 Toyota Sprinter 2.0D SE Vintage holds a special place in the lineup of Toyota's offerings during that era. With its unique combination of features and performance, it captured the attention of enthusiasts and practical drivers alike. As a sedan, the Sprinter 2.0D SE Vintage boasted a distinctive design that showcased both style and functionality. This model was a part of the FF (front-wheel drive) category, ensuring nimble handling and efficient space utilization.

Under the hood, the Sprinter 2.0D SE Vintage housed a 2.0-liter diesel engine that exhibited a balance between power and fuel efficiency. The engine's specifications, including its displacement and output, contributed to a driving experience that aligned with the era's expectations. This model's 4AT (4-speed automatic transmission) provided seamless gear shifts, enhancing overall driving comfort.

In terms of dimensions, the Sprinter 2.0D SE Vintage struck a balance between compact exterior proportions and a spacious interior cabin. With a well-considered wheelbase and axle lengths, the vehicle managed to achieve a comfortable ride while maintaining maneuverability. The interior layout accommodated five passengers across four doors, emphasizing convenience without compromising on the vehicle's footprint.

Safety features were also a consideration in the design of the Sprinter 2.0D SE Vintage. The inclusion of driver's airbag and side impact bars showcased Toyota's commitment to enhancing driver and passenger safety. The standardized 3-point safety belts further contributed to a secure driving environment.

In terms of amenities, the Sprinter 2.0D SE Vintage offered essential features such as power windows, power steering, and a tachometer. These features combined to create a driver-focused cabin that catered to both comfort and control. The vehicle's entertainment options included a radio and an optional autoreverse cassette player, adding a touch of entertainment to journeys.

Overall, the 1995-1996 Toyota Sprinter 2.0D SE Vintage brought together a range of attributes that catered to diverse preferences. Its blend of performance, design, and functionality marked it as a notable offering in the automotive landscape of its time.

Model Overview

The 1995-1996 Toyota Sprinter 2.0D SE Vintage emerges as a standout model within Toyota's lineup during this period. As a part of the Sprinter series, this vehicle represented a fusion of style, performance, and practicality. Designed as a sedan, it embodied a blend of contemporary aesthetics and functional design elements that resonated with a wide range of drivers.

Underneath its sleek exterior, the Sprinter 2.0D SE Vintage was equipped with a 2.0-liter diesel engine that provided a harmonious balance between power and fuel efficiency. This engine option was tailored to meet the demands of various driving conditions, ensuring a reliable and efficient performance on the road.

The vehicle's body type, sedan, contributed to its versatility, making it suitable for daily commuting as well as longer journeys. The front-wheel-drive configuration delivered a driving experience that combined responsive handling with efficient use of interior space.

Inside the cabin, the Sprinter 2.0D SE Vintage offered a comfortable environment for both the driver and passengers. The seating arrangement accommodated up to five occupants, spread across four doors. This setup aimed to provide convenience without compromising on the vehicle's overall dimensions.

Safety features were thoughtfully integrated into the design, with the inclusion of a driver's airbag and side impact bars. These elements underscored Toyota's commitment to ensuring a secure driving experience for everyone on board.

The model's dimensions were thoughtfully considered to strike a balance between compactness and interior comfort. The wheelbase and axle lengths were optimized to enhance stability while preserving maneuverability.

In terms of amenities, the Sprinter 2.0D SE Vintage offered practical features such as power windows, power steering, and a tachometer. These elements catered to the driver's comfort and control while on the road.

In essence, the 1995-1996 Toyota Sprinter 2.0D SE Vintage embodied a harmonious convergence of performance, design, and utility. Its role as a sedan with a focus on driver and passenger satisfaction made it a distinctive choice in the automotive landscape of its time.

Engine Specifications

At the heart of the 1995-1996 Toyota Sprinter 2.0D SE Vintage lies a well-engineered powertrain that defines its performance characteristics. This model is powered by a 2.0-liter diesel engine that showcases a fusion of power, efficiency, and reliability. The engine's displacement of 1974 cm3 speaks to its capacity for delivering adequate performance across various driving scenarios.

The engine, bearing the code 2C-III, is characterized by its water-cooled, four-cylinder SOHC configuration. This setup optimizes the combustion process, enhancing both efficiency and power delivery. The engine's compression ratio of 23 contributes to efficient fuel utilization, aligning with the prevailing environmental concerns of the time.

In terms of power output, the Sprinter 2.0D SE Vintage boasts a maximum of 74 PS (73 bhp) or 54.4 kW. This power is harnessed at 4700 rpm, ensuring a responsive and versatile performance. The torque figures are equally noteworthy, with a peak torque of 129.4 Nm (95.4 lb.ft) or 13.2 kg.m available at 2800 rpm. This torque range facilitates confident acceleration and smooth cruising.

The engine's fuel type, light oil, aligns with the model's emphasis on fuel efficiency. This choice of fuel type enables the vehicle to achieve a commendable fuel consumption rate. The 1995-1996 Toyota Sprinter 2.0D SE Vintage records a fuel consumption rate of 61.8 mpg US (74.3 mpg UK) or 3.8 L/100km in the 60 km/h mode, exemplifying its economical nature.

The engine's performance is complemented by a 4-speed automatic transmission (4AT) that ensures smooth gear changes and optimal power delivery. This transmission setup harmonizes with the engine's characteristics, creating a balanced and enjoyable driving experience.

In summary, the engine specifications of the 1995-1996 Toyota Sprinter 2.0D SE Vintage underscore its commitment to efficient performance. From its power output to its torque delivery and fuel efficiency, this powertrain encapsulates the era's emphasis on balanced driving dynamics and economic operation.

Fuel Efficiency

The 1995-1996 Toyota Sprinter 2.0D SE Vintage demonstrates a commendable commitment to fuel efficiency, aligning with the priorities of its era. Powered by a 2.0-liter diesel engine, this model showcases a harmonious balance between performance and economical operation.

One of the notable aspects contributing to the Sprinter 2.0D SE Vintage's fuel efficiency is its engine's design and configuration. The water-cooled four-cylinder SOHC setup optimizes combustion processes, resulting in a judicious use of fuel without compromising on power delivery. This design philosophy reflects Toyota's dedication to producing vehicles that cater to both performance enthusiasts and those seeking economical transportation.

The choice of fuel type, light oil, is another testament to the Sprinter's economical nature. This fuel type complements the engine's design, enhancing combustion efficiency and subsequently, fuel mileage. The result is a vehicle that can cover considerable distances on a relatively smaller amount of fuel, making it a practical choice for both city commuting and longer journeys.

The model's engine specifications, such as its compression ratio and torque delivery, further contribute to its overall fuel efficiency. By delivering ample torque at lower rpm ranges, the vehicle reduces the need for frequent gear changes, optimizing fuel consumption while enhancing driving convenience.

The 1995-1996 Toyota Sprinter 2.0D SE Vintage's efficiency is quantified by its fuel consumption rate of 61.8 mpg US (74.3 mpg UK) or 3.8 L/100km in the 60 km/h mode. This impressive figure underscores the model's capability to stretch each gallon of fuel to cover substantial distances, highlighting its alignment with the priorities of an era that increasingly emphasized responsible resource utilization.

In conclusion, the Sprinter 2.0D SE Vintage's focus on fuel efficiency cements its position as a vehicle that caters to both performance and economical sensibilities. Through thoughtful engineering and design choices, Toyota managed to create a model that addressed the practical concerns of its time while offering a pleasurable driving experience.

Dimensions and Sizes

The 1995-1996 Toyota Sprinter 2.0D SE Vintage embodies a thoughtful approach to dimensions and sizes, striking a balance between exterior compactness and interior comfort. As a sedan model, it presents an exterior length of 431 cm (169.68 inches), showcasing a design that manages to be both agile and accommodating.

This exterior length translates into an interior that caters to the needs of passengers while maintaining a manageable footprint. The interior length of 187.5 cm (73.81 inches) and interior width of 143.5 cm (56.49 inches) contribute to a cabin space that comfortably accommodates five passengers across its four doors.

With an exterior width of 169 cm (66.53 inches), the Sprinter 2.0D SE Vintage balances maneuverability with interior space, ensuring that city driving and parking are hassle-free. The exterior height of 138.5 cm (54.52 inches) complements the overall proportions, creating an appealing and cohesive design.

The vehicle's wheelbase of 246.5 cm (97.04 inches) plays a significant role in both stability and ride comfort. This measurement optimizes the positioning of the axles, contributing to the Sprinter's balanced handling characteristics.

In terms of ride height, the Sprinter 2.0D SE Vintage maintains a ground clearance of 15 cm (5.9 inches). This height facilitates smooth passage over various road surfaces while contributing to the vehicle's overall aerodynamic profile.

The carefully calculated dimensions extend to the axle lengths, with the front axle measuring 147 cm (57.87 inches) and the rear axle measuring 146 cm (57.48 inches). This thoughtful balance of axle lengths ensures that the vehicle's weight distribution and handling characteristics are optimized.

With a weight of 1080 kg (2380 lbs), the Sprinter 2.0D SE Vintage manages to strike a balance between structural integrity and fuel efficiency. This weight aligns with the vehicle's overall design philosophy, contributing to its agile handling and overall performance.

In summary, the 1995-1996 Toyota Sprinter 2.0D SE Vintage's dimensions and sizes reflect a keen attention to creating a sedan that offers a comfortable interior while maintaining exterior proportions that suit various driving scenarios. This harmonious balance underscores Toyota's commitment to crafting vehicles that cater to both aesthetic preferences and practical needs.

Wheel Specifications

The 1995-1996 Toyota Sprinter 2.0D SE Vintage is equipped with wheel specifications that enhance both its performance and visual appeal. These specifications are a reflection of Toyota's dedication to providing a driving experience that marries aesthetics with practicality.

The front and rear tires are both sized at 165S R13, contributing to a balanced and uniform appearance. This choice of tire dimensions ensures consistent handling characteristics and optimized grip, regardless of road conditions.

In addition to the standard tire dimensions, an alternative option is available: 175 / 70 R13 82S. This option offers a slightly wider profile and higher load rating, catering to drivers who prioritize enhanced traction and load-carrying capabilities.

The choice of wheel dimensions, in conjunction with the tire specifications, impacts both the vehicle's handling and overall aesthetics. These specifications are carefully considered to complement the Sprinter 2.0D SE Vintage's overall design philosophy.

The wheel and tire specifications contribute to the vehicle's performance in various scenarios, from city driving to longer journeys. The dimensions chosen by Toyota provide a harmonious balance between ride comfort, handling, and visual appeal.

In summary, the 1995-1996 Toyota Sprinter 2.0D SE Vintage's wheel specifications underscore the brand's commitment to crafting vehicles that offer a well-rounded driving experience. The careful consideration of tire dimensions and wheel options ensures that the vehicle's performance and appearance align with the expectations of drivers during that era.

Trim Levels and Features

The 1995-1996 Toyota Sprinter 2.0D SE Vintage is offered in a trim level that showcases a blend of features designed to cater to both driver and passenger needs. This trim level reflects Toyota's commitment to delivering a well-rounded driving experience by combining practicality and convenience.

Inside the cabin of the Sprinter 2.0D SE Vintage, a range of features adds to the comfort and control of both the driver and passengers. The presence of power windows contributes to effortless adjustments, enhancing convenience during city drives or longer journeys. Power steering ensures smooth handling, aligning with the era's focus on driving ease.

The inclusion of a tachometer provides the driver with essential information about the engine's performance, enabling informed driving decisions. Centralized door lock functionality further enhances convenience, offering a seamless way to secure the vehicle.

Both left-hand drive and right-hand drive options are available, catering to diverse markets and driving preferences. This approach reflects Toyota's commitment to accommodating the unique needs of drivers in various regions.

The Sprinter 2.0D SE Vintage's interior layout aims to provide both driver and passengers with a comfortable experience. The presence of adjustable steering ensures that drivers can find their preferred driving position, enhancing both comfort and control.

While some optional features, such as leather seats and cruise control, are not part of the standard trim, the base level offers a well-considered selection of amenities. These features contribute to a cabin environment that prioritizes practicality and convenience, aligning with the era's focus on a balanced driving experience.

In summary, the 1995-1996 Toyota Sprinter 2.0D SE Vintage's trim level and features reflect Toyota's commitment to providing a vehicle that caters to a wide range of driver and passenger needs. The combination of practical amenities and convenience-enhancing features underscores the brand's dedication to creating vehicles that align with the priorities of its time.

Generational Changes

The 1995-1996 Toyota Sprinter 2.0D SE Vintage represents a specific era within the Sprinter lineage, showcasing the brand's commitment to evolution and improvement. While the span of just two years limits the extent of generational changes, there are still notable aspects that differentiate this model from its predecessors.

In terms of design, the Sprinter 2.0D SE Vintage retained the overall aesthetic that defined the Sprinter series. However, subtle refinements were introduced to reflect the design trends of the mid-1990s. These refinements included tweaks to exterior elements such as lighting and detailing, allowing the model to maintain a contemporary appearance.

Technological advancements during this period influenced the vehicle's features and amenities. The inclusion of power windows, power steering, and other modern conveniences was in line with the era's increasing emphasis on comfort and practicality.

Engine technology and performance optimization also played a role in the generational changes. The 2.0-liter diesel engine powering the Sprinter 2.0D SE Vintage featured refinements that aimed to strike a balance between power output and fuel efficiency. These updates were in line with the industry's continuous efforts to enhance engine performance and environmental compatibility.

The Sprinter 2.0D SE Vintage's suspension and handling characteristics likely saw improvements as well. Toyota's dedication to creating vehicles with responsive and comfortable driving experiences would likely have resulted in adjustments to suspension components and tuning.

While the generational changes between 1995 and 1996 may not have brought radical shifts, the 1995-1996 Toyota Sprinter 2.0D SE Vintage was undoubtedly influenced by the evolving automotive landscape of its time. The model's ability to incorporate refinements while maintaining its core identity speaks to Toyota's ability to adapt to changing trends while staying true to its brand principles.

Fuel Tank Capacity

The 1995-1996 Toyota Sprinter 2.0D SE Vintage features a fuel tank capacity that aligns with its focus on practicality and efficiency. With a fuel tank capacity of 13.2 US gallons (10.9 UK gallons or 50 liters), this model is designed to cover significant distances without frequent refueling stops.

This fuel tank capacity is a testament to Toyota's understanding of the importance of extended driving ranges, especially in an era that emphasized economical operation. The ability to travel a considerable distance on a single tank of fuel adds convenience and flexibility to the driving experience, whether for daily commuting or longer journeys.

The choice of a 13.2 US-gallon fuel tank capacity strikes a balance between the vehicle's size and its efficiency, ensuring that the Sprinter 2.0D SE Vintage remains lightweight and agile while accommodating an ample amount of fuel. This balance aligns with the brand's commitment to delivering vehicles that cater to diverse driving needs.

The larger fuel tank capacity contributes to reducing the frequency of refueling stops, adding convenience to the driver's experience. Additionally, this capacity is in line with the vehicle's overall design philosophy, which prioritizes fuel efficiency and optimized resource utilization.

In summary, the 1995-1996 Toyota Sprinter 2.0D SE Vintage's fuel tank capacity of 13.2 US gallons underscores its practicality and efficiency. This capacity aligns with the model's focus on economical operation, offering a driving experience that caters to the priorities of its time.

Conclusion

The 1995-1996 Toyota Sprinter 2.0D SE Vintage stands as a testament to Toyota's commitment to crafting vehicles that encapsulate the priorities of their time. With its blend of performance, efficiency, and practicality, this model managed to capture the attention of drivers seeking a well-rounded driving experience.

As a sedan, the Sprinter 2.0D SE Vintage showcases dimensions that strike a balance between exterior proportions and interior comfort. This design philosophy reflects Toyota's understanding of the need for a vehicle that can navigate urban environments while providing ample cabin space.

The engine specifications, highlighted by a 2.0-liter diesel engine, reflect the era's emphasis on efficient and economical performance. The choice of engine type and powertrain components contribute to a vehicle that can deliver both responsive acceleration and frugal fuel consumption.

The inclusion of features such as power windows, power steering, and a tachometer adds convenience and control to the driving experience. These amenities align with the era's growing demand for vehicles that cater to comfort and practicality.

Safety features, such as the driver's airbag and side impact bars, further demonstrate Toyota's dedication to passenger security. The standardized safety measures enhance the vehicle's overall appeal as a reliable and secure mode of transportation.

Overall, the 1995-1996 Toyota Sprinter 2.0D SE Vintage represents a snapshot of automotive design and engineering during this period. Its ability to incorporate a range of features and characteristics that satisfy diverse driving needs is a testament to Toyota's prowess in creating vehicles that transcend trends and stand as lasting examples of quality and functionality.

Frequently Asked Questions (FAQ) about the 1995-1996 Toyota Sprinter 2.0D SE Vintage