1991 Toyota Sprinter 2.0D SE limited Specs

OVERVIEW

With a fuel consumption of 61.8 mpg US - 74.3 mpg UK - 3.8 L/100km, a weight of 2469 lbs (1120 kg), the Toyota Sprinter 2.0D SE limited has a water cooling 4 cylinder SOHC engine, a Light oil engine 2C. This engine 2C produces a maximum power of 74 PS (73 bhp - 54.4 kW) at 4700 rpm and a maximum torque of 132.3 Nm (97.6 lb.ft - 13.5 kg.m) at 2800 rpm. The engine power is transmitted to the road by the front wheel drive (FF) with a 4AT gearbox. For stopping power, the Toyota Sprinter 2.0D SE limited braking system includes Leading trailing drum brake at the rear and Ventilated disk at the front. Stock tire sizes are 165S on 13 inch rims at the rear and 165S on 13 inch rims at the front. Chassis details - Toyota Sprinter 2.0D SE limited has strut coil spring rear suspension and strut coil spring front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Sprinter Specs Database

More photos Toyota Sprinter

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 23, 2024

Introduction to the Toyota Sprinter 2.0D SE Limited

The Toyota Sprinter 2.0D SE Limited, produced from September 1991 to April 1993, was an esteemed member of the Sprinter lineup. As a stylish sedan, it garnered attention for its reliability and practicality. This front-wheel-drive vehicle, with a 4-speed automatic transmission, offered a smooth and comfortable driving experience.

Under the hood, the Sprinter 2.0D SE Limited housed a powerful 1974 cm3 engine, identified by the code "2C." With a maximum power output of 74 PS and a torque of 132.3 Nm, it provided sufficient performance for daily commuting needs.

The car's exterior dimensions measured at 429 cm in length, 168.5 cm in width, and 137.5 cm in height. Inside, it accommodated five passengers with an interior length of 182 cm, a width of 142 cm, and a height of 115 cm. The wheelbase extended to 246.5 cm, offering stability on the road.

Safety-wise, the Toyota Sprinter 2.0D SE Limited featured side impact bars and 3-point safety belts as standard. Additionally, it came with options for a driver's airbag and an additional stop light.

With a fuel tank capacity of 13.2 US gallons (50 L), the Sprinter 2.0D SE Limited boasted impressive fuel efficiency, achieving approximately 61.8 mpg in the 60 km/h mode. This made it an economical choice for drivers seeking a fuel-efficient ride.

The suspension system utilized a strut coil spring setup both at the front and rear. The sedan rode on 165S R13 tires, providing a comfortable and smooth journey.

Inside the vehicle, standard features included power windows, power steering, and a tachometer. However, it did not come equipped with a power-adjustable front or back seat, leather seating, or cruise control.

The Toyota Sprinter 2.0D SE Limited offered an automatic air conditioning system, AM/FM radio, and options for a cassette player or CD player. While it lacked some advanced amenities, it provided essential conveniences for a pleasant driving experience.

Overall, the 1991-1993 Toyota Sprinter 2.0D SE Limited remained a practical and reliable choice, appealing to those seeking a well-built sedan with fuel efficiency and standard safety features. Its combination of functionality and value made it a noteworthy addition to the Sprinter series.

Overview of the 1991-1993 Toyota Sprinter Models

The 1991-1993 Toyota Sprinter 2.0D SE Limited was part of the well-regarded Toyota Sprinter lineup during its production period. As a series of stylish sedans, the Sprinter models were known for their dependability and practicality.

The Sprinter 2.0D SE Limited was powered by a robust 1974 cm3 engine, denoted by the engine code "2C." With a 4-speed automatic transmission and front-wheel-drive configuration, it offered a smooth and comfortable driving experience.

In terms of size and dimensions, the Sprinter 2.0D SE Limited featured an exterior length of 429 cm, a width of 168.5 cm, and a height of 137.5 cm. The sedan provided ample space for five passengers, with an interior length of 182 cm, a width of 142 cm, and a height of 115 cm. The wheelbase measured at 246.5 cm, contributing to the car's stability on the road.

Safety features were well-considered in the Sprinter 2.0D SE Limited, including side impact bars and standard 3-point safety belts. For additional safety, buyers had the option to equip the vehicle with a driver's airbag and an additional stop light.

One of the car's standout features was its impressive fuel efficiency. The Sprinter 2.0D SE Limited's fuel tank capacity was 13.2 US gallons (50 L), and it achieved approximately 61.8 mpg in the 60 km/h mode. This made it a cost-effective choice for those looking to save on fuel expenses.

The suspension system of the Sprinter 2.0D SE Limited utilized a strut coil spring setup both at the front and rear, contributing to a comfortable ride quality. The sedan rolled on 165S R13 tires, enhancing its smooth and steady performance.

Inside the cabin, standard features included power windows, power steering, and a tachometer. However, it did not offer power-adjustable seats or leather seating, keeping the focus on practicality and affordability.

The 1991-1993 Toyota Sprinter 2.0D SE Limited came with an automatic air conditioning system, AM/FM radio, and options for a cassette player or CD player. While it lacked some modern amenities, it provided essential comforts for everyday driving.

Overall, the 1991-1993 Toyota Sprinter models, including the 2.0D SE Limited, offered reliable transportation with efficient fuel consumption. Its combination of functionality and value made it a popular choice among buyers seeking a dependable and economical sedan.

Engine Specifications and Performance

The Toyota Sprinter 2.0D SE Limited, manufactured between 1991 and 1993, housed an impressive engine that delivered reliable performance. Under the hood, this sedan was equipped with a 1974 cm3 engine identified by the engine code "2C." This water-cooled, 4-cylinder, SOHC engine provided a power output of 74 PS (73 bhp) or 54.4 kW at 4700 rpm.

The engine's torque capacity was equally commendable, generating a maximum torque of 132.3 Nm (97.6 lb.ft) or 13.5 kg.m at 2800 rpm. With a compression ratio of 23, the engine was optimized for efficient combustion, contributing to its fuel efficiency.

In terms of fuel consumption, the Sprinter 2.0D SE Limited excelled in providing economical rides. It achieved an impressive fuel consumption rate of approximately 61.8 mpg in the 60 km/h mode, making it a budget-friendly choice for daily commuting.

The engine's transmission was paired with a 4-speed automatic gearbox, offering smooth gear shifts and a hassle-free driving experience. While it may not have been a high-performance engine, it struck a balance between power and fuel efficiency, catering to practicality and everyday usability.

The Toyota Sprinter 2.0D SE Limited was designed for urban and suburban driving, providing sufficient power for city commutes and highway cruising alike. The 2C engine's reliability and durability were in line with Toyota's reputation for producing long-lasting vehicles, ensuring a dependable ride for owners over the years.

Whether tackling daily errands or embarking on longer journeys, the engine of the 1991-1993 Toyota Sprinter 2.0D SE Limited delivered satisfactory performance, making it a sought-after choice among buyers looking for a reliable and fuel-efficient sedan.

Fuel Efficiency and Consumption (MPG)

The 1991-1993 Toyota Sprinter 2.0D SE Limited was lauded for its remarkable fuel efficiency and economical consumption. Equipped with a 1974 cm3 engine code-named "2C," this sedan excelled in providing a budget-friendly driving experience.

One of the standout features of the Sprinter 2.0D SE Limited was its impressive fuel consumption rate. The vehicle achieved approximately 61.8 miles per gallon (mpg) in the 60 km/h mode, making it an economical choice for daily commuting and long-distance driving alike.

With its 13.2 US gallons (50 liters) fuel tank capacity, the Sprinter 2.0D SE Limited offered an extended driving range before requiring refueling. This allowed drivers to cover more distance without frequent stops at the fuel station, enhancing convenience during journeys.

The combination of the 2C engine's efficient design, along with the 4-speed automatic transmission and front-wheel-drive setup, optimized the car's fuel consumption without compromising on performance. The vehicle's engineering and aerodynamics played a crucial role in achieving such impressive fuel efficiency.

Whether navigating through city traffic or cruising on the highway, the Sprinter 2.0D SE Limited demonstrated its ability to provide a cost-effective driving experience. This fuel efficiency not only saved money for the owners but also contributed to reducing their carbon footprint, making it an environmentally conscious choice for the time.

Thanks to its fuel-saving features and practicality, the 1991-1993 Toyota Sprinter 2.0D SE Limited appealed to a wide range of drivers seeking a reliable and budget-friendly sedan without compromising on fuel efficiency or performance.

Fuel Tank Capacity and Range

The 1991-1993 Toyota Sprinter 2.0D SE Limited boasted a practical fuel tank capacity that contributed to its commendable driving range. With a fuel tank capacity of 13.2 US gallons (50 liters), this sedan provided ample fuel storage for extended journeys without the need for frequent refueling stops.

The spacious fuel tank allowed drivers to cover a significant distance before requiring a refill, making it suitable for both city commutes and long highway trips. The economical fuel consumption rate of approximately 61.8 miles per gallon (mpg) in the 60 km/h mode further extended the car's driving range, enhancing its practicality for daily use.

For drivers who valued convenience and efficiency, the Sprinter 2.0D SE Limited's fuel tank capacity and range were key selling points. The ability to cover more miles per tank filled not only saved time but also reduced the overall cost of fuel consumption, making it an economical choice for budget-conscious drivers.

The combination of the 2C engine's efficiency, aerodynamic design, and a well-sized fuel tank ensured that the 1991-1993 Toyota Sprinter 2.0D SE Limited delivered a satisfying driving experience. Whether navigating through city traffic or embarking on long journeys, the sedan provided a balance of practicality and efficiency, making it a sought-after option among drivers seeking a reliable and fuel-efficient vehicle.

Dimensions and Exterior Sizes

The 1991-1993 Toyota Sprinter 2.0D SE Limited exhibited a well-thought-out design with dimensions and exterior sizes that contributed to its practicality and aesthetic appeal. As a sedan, it provided ample space for both passengers and cargo while maintaining a sleek and stylish appearance.

The exterior length of the Sprinter 2.0D SE Limited measured at 429 cm, while the width extended to 168.5 cm. With an exterior height of 137.5 cm, the sedan presented a well-proportioned silhouette on the road. These dimensions contributed to the car's maneuverability and ease of parking, making it well-suited for urban driving.

Inside the vehicle, passengers enjoyed comfortable legroom with an interior length of 182 cm and an interior width of 142 cm. The interior height of 115 cm provided ample headspace for passengers, enhancing the overall comfort of the ride.

The car's wheelbase measured at 246.5 cm, contributing to its stability and smooth handling on various road conditions. The front axle length extended to 147 cm, while the rear axle length measured at 146 cm, further adding to the sedan's well-balanced design.

Additionally, the 1991-1993 Toyota Sprinter 2.0D SE Limited featured a minimum turning circle of 4.8 meters, allowing for easy maneuvering in tight spaces and making it convenient for navigating through narrow streets and parking lots.

With a ground clearance of 15.5 cm, the Sprinter 2.0D SE Limited offered sufficient protection against road irregularities while maintaining a comfortable ride height for passengers.

The sedan's exterior dimensions and sizes, along with its sleek design, combined to create a harmonious balance of aesthetics and functionality. The attention to detail in its design allowed the 1991-1993 Toyota Sprinter 2.0D SE Limited to stand out as an appealing choice for drivers seeking both style and practicality in their daily transportation.

Interior Space and Comfort Features

The interior space and comfort features of the 1991-1993 Toyota Sprinter 2.0D SE Limited were designed with a focus on providing a pleasant driving experience for both the driver and passengers. As a practical sedan, it offered various amenities to enhance comfort and convenience during journeys.

Inside the cabin, the Sprinter 2.0D SE Limited accommodated up to five passengers, providing ample space for everyone. The interior length measured at 182 cm, offering sufficient legroom for occupants. The interior width of 142 cm allowed for a comfortable seating arrangement, ensuring that passengers had enough shoulder room for a relaxing ride.

The interior height of 115 cm provided generous headspace, promoting a comfortable and less cramped feeling within the car. The well-thought-out dimensions and proportions contributed to the overall comfort of the cabin, making long rides more enjoyable.

Standard features included power windows and power steering, which added to the convenience of operating the vehicle. The presence of a tachometer provided crucial information to the driver, enabling them to monitor the engine's RPM for optimal driving performance.

The Toyota Sprinter 2.0D SE Limited came with centralized door locks, ensuring ease of access and security for all occupants. The option for a driver's airbag further enhanced safety during the ride.

For climate control, the vehicle offered an automatic air conditioning system, allowing passengers to maintain a comfortable temperature inside the cabin regardless of external weather conditions. This feature was particularly appreciated during hot summers and cold winters.

While the Sprinter 2.0D SE Limited did not come with luxurious amenities like leather seats or wood paneling, its focus on practicality and essential comfort features made it an appealing choice for drivers seeking a reliable and functional sedan.

Overall, the 1991-1993 Toyota Sprinter 2.0D SE Limited demonstrated a thoughtful approach to interior space and comfort, ensuring that occupants experienced a comfortable and enjoyable ride, whether for daily commutes or longer journeys.

Wheel Options and Tire Sizes

The 1991-1993 Toyota Sprinter 2.0D SE Limited offered well-considered wheel options and tire sizes that contributed to its performance and handling characteristics. The choice of wheels and tires played a crucial role in the car's overall driving experience.

For the Sprinter 2.0D SE Limited, the wheel options were designed to complement the sedan's size and proportions. The wheels provided a balance between style and functionality, enhancing the car's overall appearance.

The sedan rode on 165S R13 tires, which provided a comfortable and smooth ride quality. These tires were well-suited for daily driving and city commutes, offering a good compromise between performance and fuel efficiency.

The tire size 175/70 R13 82S was also available as an option. These tires offered enhanced grip and stability on the road, which contributed to improved handling and control of the vehicle.

Both tire options were selected to ensure a comfortable and stable driving experience, regardless of road conditions. The carefully chosen tire sizes and specifications aimed to optimize the sedan's fuel efficiency while maintaining a comfortable ride for both the driver and passengers.

With the combination of well-matched wheels and tires, the 1991-1993 Toyota Sprinter 2.0D SE Limited provided a smooth and stable journey for occupants, making it a reliable and practical choice for daily transportation needs.

Trim Levels and Features Available

The 1991-1993 Toyota Sprinter 2.0D SE Limited was offered in a well-appointed trim level, providing drivers with a range of features to suit their preferences and needs. As a reliable and practical sedan, it incorporated essential amenities for a comfortable driving experience.

In terms of interior features, the Sprinter 2.0D SE Limited came with power windows and power steering, enhancing convenience for both the driver and passengers. The centralized door locks offered ease of access and added security.

The sedan featured an automatic air conditioning system, ensuring that occupants remained comfortable regardless of external weather conditions. The climate control system maintained an ideal temperature within the cabin during hot summers and chilly winters.

Safety was a priority in the Sprinter 2.0D SE Limited, as it came equipped with side impact bars and standard 3-point safety belts for all seats. For added safety, buyers had the option to equip the car with a driver's airbag and an additional stop light.

The entertainment system offered an AM/FM radio as standard. Additionally, buyers could opt for a cassette player or a CD player, providing audio entertainment during journeys.

The Sprinter 2.0D SE Limited also featured options for autoreverse cassette and a cooler, further adding to the convenience of the ride.

While the sedan focused on practicality, it did not include extravagant features such as leather seats or wood paneling. Instead, it provided essential amenities that catered to the daily needs of drivers and passengers.

The 1991-1993 Toyota Sprinter 2.0D SE Limited's trim level and available features ensured that it appealed to drivers seeking a reliable and comfortable sedan with practical amenities for everyday use.

Generational Changes and Improvements

The 1991-1993 Toyota Sprinter 2.0D SE Limited represented a significant phase in the Sprinter model's timeline, featuring various changes and improvements from its predecessors. While the core design and principles remained consistent, the manufacturer introduced updates to enhance the car's overall performance, comfort, and safety.

Throughout its production years, Toyota focused on refining the Sprinter 2.0D SE Limited to meet evolving market demands and technological advancements. While specific details of generational changes and improvements are not available, it is common for manufacturers to make subtle adjustments to address feedback from customers and industry advancements.

Improvements might include enhancements to the engine, transmission, or aerodynamics, aiming to optimize fuel efficiency and performance. Safety features could also be updated to meet or exceed prevailing safety standards, ensuring the protection of passengers.

Technological advancements in comfort and convenience might have been integrated into the sedan's interior, offering modern amenities to enhance the driving experience.

Additionally, changes in exterior design and styling might have been introduced to keep the Sprinter 2.0D SE Limited fresh and appealing to potential buyers.

Toyota's commitment to reliability and durability likely remained a priority, ensuring that the Sprinter 2.0D SE Limited maintained its reputation for being a dependable and long-lasting vehicle.

Overall, while specific generational changes and improvements are not detailed in available information, it is reasonable to assume that the 1991-1993 Toyota Sprinter 2.0D SE Limited saw updates and enhancements to maintain its competitiveness and cater to the demands of the automotive market during its production years.

Comparing Fuel Average with Competing Models

The 1991-1993 Toyota Sprinter 2.0D SE Limited stood out in the market due to its commendable fuel efficiency and economical consumption. When comparing its fuel average with competing models of the time, the Sprinter 2.0D SE Limited often emerged as a top choice for budget-conscious drivers seeking a reliable and fuel-efficient sedan.

Thanks to its 1974 cm3 engine, identified by the engine code "2C," the Sprinter 2.0D SE Limited achieved an impressive fuel consumption rate of approximately 61.8 miles per gallon (mpg) in the 60 km/h mode. This made it one of the frontrunners in its segment in terms of fuel efficiency.

Competing models might have offered similar engine sizes and configurations, but the Sprinter 2.0D SE Limited's engineering and aerodynamics played a pivotal role in its exceptional fuel efficiency. Toyota's commitment to optimizing performance without compromising on fuel economy made the sedan a strong contender in the market.

While exact comparisons with competing models' fuel averages are not available, it is reasonable to assume that the Sprinter 2.0D SE Limited's economical fuel consumption and extended driving range set it apart from its peers.

For drivers seeking to save on fuel expenses and reduce their carbon footprint, the 1991-1993 Toyota Sprinter 2.0D SE Limited presented a compelling option among competing sedans. Its balance of fuel efficiency, practicality, and reliability made it a popular choice for those looking to make the most of their daily commutes and long-distance journeys.

Maintenance and Reliability

The 1991-1993 Toyota Sprinter 2.0D SE Limited was known for its exceptional maintenance and reliability, contributing to its popularity among drivers seeking a dependable and long-lasting vehicle. Toyota's reputation for building durable cars was evident in the Sprinter 2.0D SE Limited's engineering and design.

Regular maintenance played a crucial role in ensuring the sedan's optimal performance and longevity. Following the manufacturer's recommended maintenance schedule, which typically included oil and filter changes, tire rotations, and brake inspections, helped keep the vehicle running smoothly.

The 2C engine's robust build and efficient design contributed to the car's reliability. Proper maintenance and care allowed the engine to deliver consistent performance over the years, making it a reliable choice for daily commuting and long journeys.

Owners often praised the Sprinter 2.0D SE Limited's ability to withstand various road conditions and climates. The sedan's well-built frame and durable components contributed to its resilience, allowing it to maintain its performance and structural integrity over time.

Toyota's commitment to quality control and stringent manufacturing processes further ensured the vehicle's reliability. The car's design was carefully engineered to reduce potential mechanical issues, providing owners with peace of mind and confidence in their investment.

Moreover, Toyota's extensive service network and availability of genuine parts facilitated easy access to maintenance and repair services for the Sprinter 2.0D SE Limited. This streamlined the ownership experience and further contributed to the sedan's reputation for being a low-maintenance and reliable choice.

The 1991-1993 Toyota Sprinter 2.0D SE Limited's combination of regular maintenance practices, durable engineering, and Toyota's commitment to quality and reliability made it a sought-after option for drivers seeking a dependable and long-lasting sedan for their daily transportation needs.

Driving Experience and Handling

The 1991-1993 Toyota Sprinter 2.0D SE Limited offered a satisfying driving experience characterized by a balance of comfort, efficiency, and handling capabilities. As a practical sedan, it provided a smooth ride that catered to the needs of daily commuting and long-distance journeys.

The sedan's 2C engine, known for its reliability and fuel efficiency, delivered adequate power for urban driving and highway cruising. The engine's design optimized fuel consumption without compromising on performance, making it a cost-effective choice for budget-conscious drivers.

The 4-speed automatic transmission offered seamless gear shifts, contributing to a hassle-free driving experience. The smooth transmission transitions added to the sedan's overall comfort, particularly during stop-and-go traffic.

The Sprinter 2.0D SE Limited's front-wheel-drive configuration, combined with a well-tuned suspension system, provided stable handling and responsive steering. The sedan's compact dimensions and minimum turning circle allowed for easy maneuverability, making it convenient for navigating through tight city streets and parking lots.

The suspension, featuring a strut coil spring setup both at the front and rear, offered a comfortable and controlled ride quality, effectively absorbing road imperfections and enhancing passenger comfort.

Additionally, the sedan's well-built frame and aerodynamic design contributed to reduced road noise and wind resistance, further adding to the overall driving experience.

Owners often praised the Sprinter 2.0D SE Limited's reliability and low maintenance needs, which translated into a stress-free ownership experience. The car's durability and dependable performance instilled confidence in drivers, especially during long journeys.

While not a high-performance vehicle, the 1991-1993 Toyota Sprinter 2.0D SE Limited provided a well-rounded driving experience that appealed to a wide range of drivers seeking a practical, efficient, and reliable sedan for their everyday transportation needs.

Safety Features and Ratings

The 1991-1993 Toyota Sprinter 2.0D SE Limited prioritized safety, offering a range of features designed to protect occupants and enhance overall safety during journeys. While specific safety ratings from official testing organizations for this model are not available, the sedan's design and safety features were well-regarded during its production years.

The Sprinter 2.0D SE Limited was equipped with front disc brakes and rear leading trailing drum brakes, providing reliable stopping power and control. The braking system worked in tandem with the sedan's suspension and steering to ensure responsive and predictable handling, enhancing safety during sudden maneuvers or emergency stops.

The car's sturdy frame and side impact bars added an additional layer of protection in the event of a collision, reducing the risk of injuries to occupants.

Standard 3-point safety belts for all seating positions contributed to occupant safety by securing passengers in place during a crash. Seatbelts are a crucial safety feature that helps prevent occupants from being thrown forward in the event of a collision.

For added safety, the Sprinter 2.0D SE Limited offered an option for a driver's airbag. Airbags provide supplementary protection for the driver in frontal collisions, reducing the risk of head and chest injuries.

In terms of safety ratings, the sedan's reputation for reliability and durable construction made it a favored choice among drivers seeking a dependable and safe vehicle. Toyota's commitment to safety engineering and rigorous quality control processes further instilled confidence in the car's safety features.

While specific safety ratings might vary depending on regional regulations and testing organizations, the 1991-1993 Toyota Sprinter 2.0D SE Limited's array of safety features and sturdy build contributed to its reputation as a safe and reliable sedan for daily use.

Conclusion: The Legacy of Toyota Sprinter 2.0D SE Limited

The 1991-1993 Toyota Sprinter 2.0D SE Limited left a lasting legacy as a practical, reliable, and fuel-efficient sedan. With its 2C engine, the car achieved an impressive fuel consumption rate, making it an economical choice for budget-conscious drivers. The sedan's emphasis on fuel efficiency without compromising on performance demonstrated Toyota's commitment to engineering a well-rounded vehicle.

The Sprinter 2.0D SE Limited's interior space and comfort features provided a pleasant driving experience for both the driver and passengers. With ample legroom, headspace, and essential amenities like power windows and power steering, the sedan catered to the needs of daily commuting and long journeys.

Safety was a priority in the Sprinter 2.0D SE Limited, featuring front disc brakes, rear drum brakes, side impact bars, and available driver's airbag. These safety features aimed to protect occupants and enhance overall safety during drives.

The sedan's reliable performance and low maintenance needs instilled confidence in owners, making it a popular choice for those seeking a dependable and long-lasting vehicle. Toyota's reputation for building durable cars was evident in the Sprinter 2.0D SE Limited's engineering and design.

While exact generational changes and improvements are not detailed, it is reasonable to assume that Toyota made subtle adjustments to address market demands and technological advancements during the sedan's production years.

In conclusion, the 1991-1993 Toyota Sprinter 2.0D SE Limited's legacy lies in its practicality, reliability, and fuel efficiency. The sedan's well-engineered design and thoughtful features made it a sought-after option for drivers seeking a comfortable and economical choice for their daily transportation needs. Its legacy endures as a testament to Toyota's commitment to producing dependable and efficient vehicles.

FAQ: 1991-1993 Toyota Sprinter 2.0D SE Limited - Your Questions Answered!