1998 Toyota Sprinter 2.2D LX Specs

OVERVIEW

With a fuel consumption of 75.8 mpg US - 91.1 mpg UK - 3.1 L/100km, a weight of 2425 lbs (1100 kg), the Toyota Sprinter 2.2D LX has a water cooling 4 cylinder SOHC engine, a Light oil engine 3C-E. This engine 3C-E produces a maximum power of 80 PS (79 bhp - 58.9 kW) at 4400 rpm and a maximum torque of 147 Nm (108.4 lb.ft - 15 kg.m) at 2400 rpm. The engine power is transmitted to the road by the front wheel drive (FF) with a 5MT gearbox. For stopping power, the Toyota Sprinter 2.2D LX braking system includes Leading trailing drum brake at the rear and Ventilated disk at the front. Stock tire sizes are 175/70 on 13 inch rims 82S at the rear and 175/70 on 13 inch rims 82S at the front. Chassis details - Toyota Sprinter 2.2D LX has strut coil spring rear suspension and strut coil spring front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Sprinter Specs Database

More photos Toyota Sprinter

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 20, 2024

Introduction

The "1998-2000 Toyota Sprinter 2.2D LX" is a distinctive model that falls within the compact sedan category, offering a blend of efficiency, practicality, and notable features. Produced from April 1998 to July 2000, this variant showcases Toyota's commitment to delivering reliable vehicles tailored to various driving needs.

Positioned as a front-wheel drive (FF) sedan, the Sprinter 2.2D LX boasts a 5-speed manual transmission gearbox, providing drivers with a balance between control and fuel economy. Under the hood, it houses a 2184 cm3 (133.2 cu-in) engine with the code 3C-E, delivering a maximum power output of 80 PS (79 bhp) or 58.9 kW. This engine is known for its efficient performance and fuel-sipping tendencies.

The exterior dimensions of the Sprinter 2.2D LX reveal its compact yet well-proportioned nature. With an exterior length of 431.5 cm (169.88 inches) and a width of 169 cm (66.53 inches), it strikes a balance between maneuverability and interior comfort. Inside, the vehicle accommodates up to five passengers across its four doors.

Safety features are a priority, with standard driver and passenger airbags contributing to the vehicle's occupant protection. The front suspension employs a strut coil spring setup, enhancing the sedan's ride quality, while the rear suspension mirrors this configuration. The stopping power comes from ventilated disc brakes at the front and leading trailing drum brakes at the rear, ensuring controlled deceleration.

The Sprinter 2.2D LX caters to both drivers and passengers with its functional interior amenities. While leather seats are not available, options like power windows and power steering ensure convenience during daily use. Moreover, the standard inclusion of safety belt pretensioners and a child car restraint system underscores Toyota's commitment to safety.

This iteration of the Toyota Sprinter family emphasizes practicality and efficiency while maintaining a level of comfort and safety that Toyota is renowned for. The thoughtful blend of technical specifications, safety features, and interior amenities positions the 1998-2000 Toyota Sprinter 2.2D LX as an attractive choice for individuals seeking a reliable and functional compact sedan.

Engine Specifications

Powering the "1998-2000 Toyota Sprinter 2.2D LX" is a well-engineered heart that defines the sedan's efficiency and performance. Under its hood resides the 3C-E engine, which proves to be a reliable and economical choice for discerning drivers.

The 3C-E engine, a water-cooled 4-cylinder SOHC configuration, boasts a displacement of 2184 cm3 (133.2 cu-in), showcasing Toyota's commitment to balanced engineering. This powerplant generates a maximum power output of 80 PS (79 bhp) or 58.9 kW at 4400 rpm, providing ample power for urban and highway driving scenarios.

Torque, a vital metric for both acceleration and cruising, is impressive as well. The 3C-E engine produces a maximum torque of 147 Nm (108.4 lb.ft) or 15 kg.m at 2400 rpm, contributing to the sedan's dynamic performance across various speed ranges.

To support its efficiency-oriented design, the 3C-E engine boasts a compression ratio of 23, allowing for optimal combustion and fuel utilization. This engine type relies on light oil (diesel) as its fuel source, aligning with the sedan's focus on economical operation.

Paired with a 5-speed manual transmission, the 1998-2000 Toyota Sprinter 2.2D LX leverages its engine's characteristics to deliver a well-rounded driving experience. The gear ratios, including the 1st, 2nd, 3rd, 4th, and 5th gears, contribute to smooth acceleration and efficient cruising.

Fuel efficiency is a standout trait of the 3C-E engine, with the vehicle achieving an impressive fuel consumption rate of 75.8 mpg US (91.1 mpg UK) or 3.1 L/100km under the 60 km/h mode. This characteristic underscores Toyota's commitment to producing vehicles that excel in both performance and frugality.

In summary, the engine specifications of the "1998-2000 Toyota Sprinter 2.2D LX" embody a thoughtful balance of power, torque, and fuel efficiency. The 3C-E engine's performance characteristics align with Toyota's reputation for producing reliable and economical vehicles, making the Sprinter 2.2D LX a commendable choice for those seeking a versatile and efficient compact sedan.

Engine Performance

The heart of the "1998-2000 Toyota Sprinter 2.2D LX" beats with purpose, offering a balance of performance and efficiency that defines its engine's capabilities. The 3C-E engine, housed within this compact sedan, demonstrates Toyota's commitment to engineering excellence and driver satisfaction.

At the core of its performance lies the engine's ability to deliver 80 PS (79 bhp) or 58.9 kW of maximum power output at 4400 rpm. This power enables the Sprinter 2.2D LX to navigate various driving scenarios with confidence, whether it's accelerating onto highways or cruising through city streets.

Torque, the force that propels a vehicle forward, is a prominent aspect of the 3C-E engine's performance profile. With a maximum torque of 147 Nm (108.4 lb.ft) or 15 kg.m at 2400 rpm, the engine ensures responsive acceleration and steady power delivery, making overtaking and hill climbs effortless.

The 3C-E engine's characteristics, combined with its efficient compression ratio of 23, underscore its role as a fuel-efficient workhorse. This engine's prowess in fuel economy aligns seamlessly with the Sprinter 2.2D LX's reputation as an economical and environmentally friendly option for daily commuting.

When paired with the 5-speed manual transmission, the engine's power is harnessed effectively across a range of gears. This enables the sedan to perform optimally in various driving conditions, from stop-and-go traffic to open road cruising.

The vehicle's overall performance is a testament to Toyota's meticulous engineering, resulting in an engine that complements the Sprinter 2.2D LX's practicality and versatility. With its capable power delivery, efficient fuel utilization, and smooth gear transitions, the "1998-2000 Toyota Sprinter 2.2D LX" demonstrates that performance can indeed be a harmonious blend of power and efficiency.

Fuel Efficiency

The "1998-2000 Toyota Sprinter 2.2D LX" stands out for its commendable fuel efficiency, making it an ideal choice for drivers seeking economical transportation without sacrificing performance. This sedan's design and engineering prioritize optimal fuel consumption, aligning with Toyota's commitment to producing vehicles that are both environmentally friendly and budget-conscious.

At the heart of the fuel efficiency equation is the 3C-E engine, which powers the Sprinter 2.2D LX. This engine's thoughtful design, including its compression ratio of 23, promotes efficient combustion, translating into reduced fuel consumption during both urban commutes and highway journeys.

One of the standout features of this model is its impressive fuel consumption rate under the 60 km/h mode, where it achieves approximately 75.8 mpg US (91.1 mpg UK) or 3.1 L/100km. This figure underscores the vehicle's ability to cover longer distances with minimal fuel expenditure, making it a cost-effective choice for those who prioritize economical operation.

The 3C-E engine's attributes, such as its maximum torque of 147 Nm (108.4 lb.ft) at 2400 rpm, contribute to the sedan's ability to maintain steady speeds with less throttle input. This efficiency-conscious design encourages a smoother driving style that enhances fuel savings over time.

The synergy between the 3C-E engine and the 5-speed manual transmission further enhances fuel efficiency by allowing drivers to optimize gear selection based on driving conditions. The well-chosen gear ratios contribute to a seamless balance between acceleration and fuel economy.

In conclusion, the "1998-2000 Toyota Sprinter 2.2D LX" demonstrates Toyota's dedication to providing a fuel-efficient driving experience without compromising performance. With its thoughtful engine design, smart gear ratios, and impressive fuel consumption rates, this sedan proves that efficiency can coexist with practicality and driver satisfaction.

Fuel Consumption Rates

The "1998-2000 Toyota Sprinter 2.2D LX" excels in delivering impressive fuel consumption rates that cater to drivers seeking economical and budget-conscious transportation. This model's thoughtful engineering and design are geared towards minimizing fuel expenditure without compromising on performance or functionality.

Central to its fuel-efficient performance is the 3C-E engine, which powers the Sprinter 2.2D LX. This engine's design optimizes combustion efficiency, resulting in fuel consumption rates that make it a standout choice in its class.

The sedan's prowess is evident in its fuel consumption rates across various driving scenarios. Whether navigating urban streets or embarking on highway journeys, the Sprinter 2.2D LX showcases its ability to cover distances with minimal fuel consumption, aligning with Toyota's commitment to producing environmentally conscious vehicles.

Under the 60 km/h mode, this model achieves remarkable fuel consumption rates of approximately 75.8 mpg US (91.1 mpg UK) or 3.1 L/100km. This impressive figure underscores the 3C-E engine's efficiency-oriented design, encouraging economical driving practices that contribute to reduced fuel costs.

The harmonious interplay between the 3C-E engine's torque characteristics, gear ratios, and the 5-speed manual transmission further enhances the vehicle's fuel efficiency. This synergy enables drivers to navigate different speed ranges while keeping fuel consumption in check.

In summary, the "1998-2000 Toyota Sprinter 2.2D LX" sets a benchmark for fuel consumption rates within its category. Through its well-calibrated engine design, thoughtful gear ratios, and efficient transmission, this sedan proves that drivers can experience an engaging and efficient driving experience without excessive fuel consumption.

Fuel Tank Capacity

The "1998-2000 Toyota Sprinter 2.2D LX" is designed with practicality in mind, and this extends to its fuel tank capacity, ensuring drivers have a convenient balance between refueling stops and efficient driving. The sedan's engineering takes into consideration the demands of daily commutes and longer journeys, offering a fuel tank capacity that suits various driving scenarios.

The fuel tank capacity of the Sprinter 2.2D LX is approximately 13.2 US gallons (10.9 UK gallons or 50 L). This capacity strikes a balance between providing a sufficient amount of fuel for extended trips while also promoting the sedan's fuel efficiency by keeping weight and consumption in check.

With its impressive fuel consumption rates, which can reach around 75.8 mpg US (91.1 mpg UK) or 3.1 L/100km under the 60 km/h mode, the Sprinter 2.2D LX showcases its ability to cover substantial distances on a single tank of fuel. This attribute aligns with the sedan's reputation as an economical and environmentally conscious choice for drivers seeking practicality and savings.

The fuel tank capacity, combined with the 3C-E engine's fuel-efficient design, contributes to the overall cost-effective nature of the vehicle. Whether it's daily commutes, road trips, or urban explorations, the Sprinter 2.2D LX ensures that drivers can cover distances with fewer refueling stops, making it an excellent option for those prioritizing convenience and efficiency.

Dimensions and Sizes

The "1998-2000 Toyota Sprinter 2.2D LX" strikes a harmonious balance between compact exterior dimensions and well-utilized interior space, offering a vehicle that is maneuverable yet accommodating. Designed with both driver and passenger comfort in mind, the sedan's dimensions and sizes contribute to its overall practicality.

The exterior dimensions of the Sprinter 2.2D LX reveal a compact footprint that lends itself to urban driving and parking. With an exterior length of 431.5 cm (169.88 inches) and an exterior width of 169 cm (66.53 inches), the sedan is agile enough to navigate tight city streets while offering ample cabin space for passengers.

Inside, the Sprinter 2.2D LX showcases thoughtful design with an interior length of 183 cm (72.04 inches) and an interior width of 141.5 cm (55.7 inches). These dimensions contribute to a comfortable and spacious interior environment, ensuring that both driver and passengers can enjoy the journey.

The interior height, measuring at 116.5 cm (45.86 inches), provides ample headroom for occupants, enhancing the overall comfort level. This is complemented by a wheelbase of 246.5 cm (97.04 inches), which aids in stable handling and a smoother ride quality.

The sedan's seating capacity of five and four doors further underscores its practical nature, allowing for easy entry and exit for passengers. Additionally, the minimum turning circle of 4.8 meters enhances maneuverability, making it suitable for navigating both tight city corners and suburban environments.

In terms of weight, the Sprinter 2.2D LX has a weight of approximately 1100 kg (2425 lbs), contributing to its efficient fuel consumption and responsive performance. The overall dimensions and sizes of the vehicle reflect Toyota's commitment to producing a sedan that excels in both functionality and user experience, making the 1998-2000 Toyota Sprinter 2.2D LX an attractive choice for those seeking a versatile and comfortable compact sedan.

Wheel Specifications

The "1998-2000 Toyota Sprinter 2.2D LX" boasts wheel specifications that contribute to its overall handling, stability, and driving comfort. Toyota's attention to detail is evident in the selection of wheel sizes and components, ensuring that the sedan delivers a well-rounded driving experience.

The front and rear tires of the Sprinter 2.2D LX are sized at 175/70 R13 82S, offering a balanced combination of grip and comfort. These tires provide the sedan with the necessary traction for both urban driving and highway cruising, enhancing overall stability and control.

The inclusion of ventilated disc brakes at the front and leading trailing drum brakes at the rear showcases Toyota's commitment to safety and controlled deceleration. These braking components work in tandem with the sedan's suspension system to ensure reliable stopping power under various driving conditions.

The choice of wheel sizes plays a role in both aesthetics and performance. The Sprinter 2.2D LX features a set of 165/80 R13 83S tires on standard rims. This tire size contributes to the vehicle's overall ride quality and handling characteristics, allowing for a balanced blend of comfort and responsiveness.

Aluminum disk components are a standard inclusion, highlighting Toyota's commitment to delivering a well-equipped vehicle. These components further contribute to the sedan's overall stability and braking efficiency, promoting a confident and controlled driving experience.

In summary, the "1998-2000 Toyota Sprinter 2.2D LX" boasts wheel specifications that align with the sedan's performance-oriented design and focus on safety. The carefully selected tire sizes, braking components, and aluminum disk features work in harmony to ensure a well-rounded driving experience that prioritizes both control and comfort.

Trim Levels and Features

The "1998-2000 Toyota Sprinter 2.2D LX" offers a range of trim levels and features that cater to drivers seeking both practicality and comfort. Toyota's approach to equipping this sedan focuses on providing a well-rounded driving experience with a variety of amenities designed to enhance the overall journey.

The trim level "2.2D LX" encapsulates the essence of the Sprinter's offerings, showcasing a thoughtful balance between essential features and driving convenience. The sedan's interior is designed to accommodate up to five passengers across four doors, providing ample space for both driver and passengers.

Inside, the Sprinter 2.2D LX offers a power steering feature as standard, contributing to effortless maneuvering and ease of control. Power windows are an optional inclusion, allowing for customizable ventilation and convenience for all occupants.

Safety features are a priority, with standard driver and passenger airbags ensuring occupant protection in case of unexpected events. The inclusion of safety belt pretensioners, safety belt limiters, and 3-point safety belts further highlights Toyota's commitment to passenger safety.

The sedan's interior dimensions, such as an interior length of 183 cm (72.04 inches) and interior width of 141.5 cm (55.7 inches), provide ample room for passengers to travel comfortably. The incorporation of features like adjustable steering, tilt steering, and centralized door lock options cater to individual comfort preferences.

Exterior features include ultraviolet glass protection as standard, contributing to both passenger comfort and the preservation of the vehicle's interior. While additional features like power-adjustable door mirrors and centralized power window control are optional, their availability underscores Toyota's aim to offer a customizable and user-centric driving experience.

In essence, the "1998-2000 Toyota Sprinter 2.2D LX" presents a trim level that emphasizes both safety and convenience. With a thoughtful selection of features and a focus on passenger comfort, this sedan caters to drivers seeking a reliable and well-equipped option for their daily commuting needs.

Generational Changes

Throughout its production span from 1998 to 2000, the "Toyota Sprinter 2.2D LX" remained consistent in its design and specifications, reflecting Toyota's dedication to producing a reliable and timeless sedan. While some vehicles undergo significant generational changes over the years, the Sprinter 2.2D LX maintained a level of stability that appealed to drivers seeking a consistent driving experience.

The sedan's exterior dimensions, interior features, and engine specifications remained largely unchanged over the years. This approach allowed Toyota to focus on refining and perfecting the initial design, resulting in a model that continued to meet the needs of its target audience.

The 3C-E engine, with its commendable performance and fuel efficiency, remained the heart of the Sprinter 2.2D LX throughout its production years. This engine's consistent specifications underscored Toyota's commitment to delivering reliability and economical operation to drivers over an extended period.

In terms of safety, standard features such as driver and passenger airbags, safety belt pretensioners, and 3-point safety belts were consistent throughout the model's production run. Toyota's dedication to passenger safety remained a constant priority, reflecting the brand's unwavering commitment to delivering secure driving experiences.

The trim level "2.2D LX" itself maintained its focus on convenience and functionality, offering a range of features designed to enhance the driving experience without compromising on safety and efficiency.

In conclusion, the "1998-2000 Toyota Sprinter 2.2D LX" stood as a testament to Toyota's approach to stability and reliability. The model's consistency in design, features, and engine specifications reflected a commitment to producing a sedan that delivered dependable performance and a well-rounded driving experience to its owners throughout its production years.

Conclusion

The "1998-2000 Toyota Sprinter 2.2D LX" encapsulates Toyota's commitment to delivering a well-rounded and dependable sedan that caters to a wide range of driving needs. Throughout its production years, this model maintained a consistent design and a focus on efficiency, safety, and practicality.

From the efficient 3C-E engine to the thoughtfully designed interior dimensions, the Sprinter 2.2D LX prioritized both performance and comfort. Its fuel consumption rates showcased Toyota's dedication to producing vehicles that are economical and environmentally friendly, aligning with modern demands for sustainable transportation.

Safety remained a top priority, with features such as driver and passenger airbags, safety belt pretensioners, and 3-point safety belts ensuring that occupants were well-protected during every journey. The sedan's stability, aided by its wheel specifications and braking components, contributed to a secure and controlled driving experience.

While some vehicles undergo significant generational changes, the Sprinter 2.2D LX embraced stability and reliability, offering a model that consistently met the expectations of drivers seeking a dependable and versatile sedan.

In summary, the "1998-2000 Toyota Sprinter 2.2D LX" encapsulates a blend of efficiency, safety, and practicality that remains relevant and valuable to drivers today. Its enduring design and consistent specifications make it a choice that stands the test of time, aligning with Toyota's legacy of producing vehicles that prioritize performance, comfort, and reliability.

Frequently Asked Questions (FAQ) About the 1998-2000 Toyota Sprinter 2.2D LX