1995 Isuzu MU 3.1DT Wizard type E Specs

OVERVIEW

With a fuel consumption of 39.8 mpg US - 47.8 mpg UK - 5.9 L/100km, a weight of 4210 lbs (1910 kg), the Isuzu MU 3.1DT Wizard type E has a water cooling 4 cylinder engine, a Light oil engine 4JG2. This engine 4JG2 produces a maximum power of 121.6 PS (120 bhp - 89.4 kW) at 3600 rpm and a maximum torque of 269.6 Nm (198.9 lb.ft - 27.5 kg.m) at 2000 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 4AT gearbox. For stopping power, the Isuzu MU 3.1DT Wizard type E braking system includes Ventilated disk at the rear and Ventilated disk at the front. Stock tire sizes are 245/70 on 16 inch rims at the rear and 245/70 on 16 inch rims at the front. Chassis details - Isuzu MU 3.1DT Wizard type E has 4 link coil spring rear suspension and double wishbone torsion bar spring front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other MU Specs Database

More photos Isuzu MU

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 19, 2024

Introduction

The "1995-1997 Isuzu MU 3.1DT Wizard Type E" holds a place in automotive history as a sturdy and versatile SUV. Produced from December 1995 to April 1997, this model made its mark with impressive off-road capabilities and a range of features that catered to various needs. With a 4WD drivetrain and a 4AT transmission, it tackled diverse terrains with ease.

Under the hood, the Isuzu MU 3.1DT Wizard Type E packed a 3.1-liter turbocharged diesel engine, known by the code "4JG2." This engine produced a maximum power output of 121.6 PS and a torque of 269.6 Nm. The engine's performance was well-suited for both city driving and off-road adventures, offering a balance of power and efficiency.

In terms of size and dimensions, the Isuzu MU 3.1DT Wizard Type E boasted an exterior length of 458.5 cm and an exterior width of 176.5 cm. The interior space accommodated five seats within an interior length of 188 cm. The SUV's wheelbase measured 276 cm, providing stability and contributing to its impressive off-road prowess.

Safety features were a priority, with standard equipment like side impact bars and a 3-point safety belt system. The suspension system consisted of a double wishbone torsion bar spring at the front and a 4-link coil spring setup at the rear. These features contributed to a comfortable ride on and off the road.

Inside, the Isuzu MU 3.1DT Wizard Type E offered conveniences like power windows, power steering, and centralized door locks. The driver's experience was enhanced by the presence of a tachometer and adjustable steering. While leather seats were not included, the model provided comfortable and adjustable seating arrangements.

The exterior design featured roof rails, a standard back wiper, and options for front fog lamps. The vehicle's weight, clocking in at 1910 kg, didn't compromise its agility. The fuel tank capacity of 85 liters ensured ample range for both urban and adventurous escapades.

As a part of Isuzu's lineup during its production years, the 1995-1997 Isuzu MU 3.1DT Wizard Type E showcased its ability to blend practicality, performance, and durability into a compelling SUV package. It remains a testament to Isuzu's commitment to delivering vehicles that cater to the diverse needs of drivers seeking both city comfort and off-road capabilities.

Engine Specifications

At the heart of the "1995-1997 Isuzu MU 3.1DT Wizard Type E" lies a robust and capable engine that contributed to its performance on and off the road. This SUV was equipped with a 3.1-liter turbocharged diesel engine, identified by the engine code "4JG2." The engine's displacement of 3059 cm³ enabled it to generate impressive power and torque figures, making it suitable for a range of driving conditions.

Producing a maximum power output of 121.6 PS and a torque of 269.6 Nm, the engine showcased its capability across a broad RPM range. With a focus on efficiency and performance, Isuzu ensured that the engine design provided a balance between power delivery and fuel economy. The torque was available at 2000 rpm, further emphasizing the engine's responsiveness.

The engine was equipped with water cooling and featured four cylinders, contributing to its durability and reliability. Notably, the engine came with a charger, enhancing its performance by providing optimal air-fuel mixture and combustion efficiency.

The fuel type used by the Isuzu MU 3.1DT Wizard Type E was light oil, a choice that complemented the engine's design for diesel fuel efficiency. This choice also aligned with the vehicle's intended use as an SUV capable of long drives and various terrains.

For gear shifting, the SUV was fitted with a 4-speed automatic transmission (4AT). This allowed for smooth gear transitions and contributed to a comfortable driving experience. With its torque-converter design, the automatic transmission provided seamless power delivery and efficient operation.

The engine's technical specifications were matched with a gear ratio distribution that supported both performance and efficiency. From the 2.804 ratio of the 1st gear to the 0.705 ratio of the 4th gear, the transmission offered versatility in handling different driving scenarios.

In summary, the "1995-1997 Isuzu MU 3.1DT Wizard Type E" boasted an engine designed to provide ample power, torque, and efficiency for varied driving conditions. The engine's well-thought-out specifications and characteristics were harmoniously combined with the vehicle's other components, resulting in an SUV that excelled in both urban and off-road environments.

Performance Metrics

The "1995-1997 Isuzu MU 3.1DT Wizard Type E" showcased commendable performance metrics that made it a versatile and capable SUV in various driving scenarios. Its powertrain and design elements contributed to its agility on the road and its off-road prowess.

The heart of this SUV was its 3.1-liter turbocharged diesel engine, denoted by the engine code "4JG2." With a maximum power output of 121.6 PS and a torque of 269.6 Nm, the engine offered substantial pulling power for both city driving and adventurous trails. This power was accessible across a broad range of RPMs, ensuring responsiveness in different driving situations.

The 4-speed automatic transmission (4AT) played a vital role in the SUV's performance. With its well-matched gear ratios, the transmission facilitated smooth acceleration and efficient power delivery. The transmission's design enhanced the overall driving experience by seamlessly transitioning through gears.

The Isuzu MU 3.1DT Wizard Type E's drivetrain featured 4WD (four-wheel drive), a configuration that bolstered its off-road capabilities. This system distributed power to all four wheels, enhancing traction on challenging terrains and providing stability on slippery surfaces. The inclusion of 4WD highlighted the SUV's versatility, allowing it to confidently tackle various road conditions.

The vehicle's suspension system played a significant role in its performance metrics. With a front suspension comprising a double wishbone torsion bar spring and a rear suspension using a 4-link coil spring setup, the SUV balanced comfort and stability. This setup ensured that passengers experienced a smooth ride both on the road and off the beaten path.

Additionally, the Isuzu MU 3.1DT Wizard Type E's weight of 1910 kg didn't hinder its maneuverability. The combination of the engine's torque, the transmission's gear ratios, and the 4WD system contributed to its ability to handle diverse terrain types.

In conclusion, the "1995-1997 Isuzu MU 3.1DT Wizard Type E" offered an array of performance metrics that blended power, torque, transmission efficiency, and drivetrain versatility. The harmonious integration of these elements showcased Isuzu's commitment to producing a well-rounded SUV capable of meeting the demands of different driving environments.

Fuel Efficiency

The "1995-1997 Isuzu MU 3.1DT Wizard Type E" impressively combined performance with fuel efficiency, making it a well-rounded SUV for various driving demands. Its diesel engine and thoughtful design elements contributed to its commendable fuel economy, an essential factor for both daily commuting and long journeys.

Powered by a 3.1-liter turbocharged diesel engine, the SUV's fuel efficiency was enhanced by the engine's design and characteristics. The engine's torque output of 269.6 Nm and power output of 121.6 PS were balanced to provide optimal fuel consumption while still delivering the necessary power for a comfortable drive.

The Isuzu MU 3.1DT Wizard Type E was equipped with a 4-speed automatic transmission (4AT), which played a role in its overall fuel efficiency. The transmission's gear ratios were designed to maintain a balance between power delivery and fuel consumption. This resulted in seamless gear transitions and efficient power utilization.

The SUV's body type, an SUV, offered a well-thought-out design that contributed to its aerodynamics and subsequently its fuel efficiency. While not the sole factor, the body's design ensured minimal drag and effective airflow management, optimizing fuel consumption.

The Isuzu MU 3.1DT Wizard Type E's diesel engine, known for its fuel-efficient nature, aligned well with the SUV's intended purpose as a versatile and economical vehicle. The inclusion of a water cooling system and a charger further enhanced combustion efficiency, directly impacting fuel consumption positively.

Furthermore, the Isuzu MU 3.1DT Wizard Type E's compact and versatile dimensions, along with its 4WD drivetrain, provided a harmonious balance between capability and efficiency. This balance allowed drivers to navigate both urban environments and challenging terrains without compromising fuel economy.

In conclusion, the "1995-1997 Isuzu MU 3.1DT Wizard Type E" showcased impressive fuel efficiency through its well-designed diesel engine, 4-speed automatic transmission, and thoughtful body design. These attributes combined to make it a fuel-conscious choice for drivers seeking a blend of performance and economy in their SUV.

Dimensions and Sizes

The "1995-1997 Isuzu MU 3.1DT Wizard Type E" was designed with dimensions and sizes that struck a balance between interior comfort and exterior maneuverability. These thoughtful measurements ensured that the SUV was well-suited for a variety of driving scenarios, from city streets to off-road trails.

With an exterior length of 458.5 cm and an exterior width of 176.5 cm, the Isuzu MU 3.1DT Wizard Type E occupied a footprint that provided ample interior space while remaining manageable on the road. This balance was further emphasized by an exterior height of 175 cm, contributing to its streamlined design and aerodynamics.

The interior dimensions of the SUV provided comfort for passengers while maintaining a practical layout. The interior length of 188 cm accommodated five seats, ensuring that occupants had sufficient legroom. The interior width of 141.5 cm allowed for comfortable seating arrangements, enhancing the overall passenger experience.

The wheelbase of the Isuzu MU 3.1DT Wizard Type E measured 276 cm, contributing to stability and a smooth ride quality. This extended wheelbase was an asset both on highways and challenging terrains, ensuring optimal traction and handling.

The ride height or ground clearance of 20.5 cm allowed the SUV to tackle uneven roads and obstacles without difficulty. This feature made the Isuzu MU 3.1DT Wizard Type E a suitable choice for off-road enthusiasts seeking to explore trails that required traversing rocky or rough terrain.

The vehicle's weight, which measured 1910 kg, was well-distributed across its dimensions, enhancing both stability and handling. The presence of five doors further eased passenger access and contributed to the vehicle's practicality.

In summary, the "1995-1997 Isuzu MU 3.1DT Wizard Type E" embodied a careful balance between exterior dimensions, interior space, and ride height. This harmony in design allowed the SUV to confidently navigate different environments, offering both comfort and capability to drivers and passengers alike.

Trim Levels

The "1995-1997 Isuzu MU 3.1DT Wizard Type E" was available in a well-curated range of trim levels, each catering to different preferences and requirements of drivers and passengers. These trim levels offered varying features and amenities, allowing buyers to choose the one that best suited their needs.

The trim levels of the Isuzu MU 3.1DT Wizard Type E were designed to provide a blend of performance, comfort, and convenience. While specific details about each trim level may vary, they generally encompassed a range of features that enhanced the driving experience.

Whether seeking a basic yet capable configuration or a trim level equipped with additional amenities, the Isuzu MU 3.1DT Wizard Type E had options to accommodate different tastes and budgets. From power windows and power steering to adjustable seating arrangements, each trim level provided a unique combination of features to meet the demands of various drivers.

Safety considerations were also addressed across the trim levels. While some safety features might have been optional depending on the trim, the overall design of the vehicle prioritized passenger protection and security.

Additionally, the exterior design elements such as roof rails and back wipers were likely available across the different trim levels, providing consistency in functionality and aesthetics.

The Isuzu MU 3.1DT Wizard Type E's range of trim levels showcased Isuzu's commitment to offering an SUV that catered to a diverse set of preferences. Whether focused on performance, comfort, or a combination of both, buyers had the opportunity to select a trim level that aligned with their lifestyle and driving needs.

Generations

The "1995-1997 Isuzu MU 3.1DT Wizard Type E" represents a specific generation within the lineage of Isuzu's MU series. This generation, produced from December 1995 to April 1997, embodies a blend of design, engineering, and features that define its distinct identity.

The second generation of the Isuzu MU series, including the 3.1DT Wizard Type E, followed in the footsteps of its predecessor with enhancements that catered to evolving automotive trends and consumer demands. While the specific details regarding the design and engineering changes may vary, the overarching goal of this generation was to build upon the success of the first generation while introducing refinements that enhanced the driving experience.

During this generation, Isuzu focused on optimizing the SUV's performance, comfort, and versatility. Improvements might have included engine enhancements, technological advancements, and updated safety features. This generation aimed to offer a seamless blend of power and efficiency, making it suitable for both urban commuting and off-road escapades.

The Isuzu MU 3.1DT Wizard Type E, as part of this generation, likely carried forward the core values and strengths that define the MU series. From its capable engine to its versatile dimensions, each element was designed to contribute to the overall appeal of the SUV.

In essence, the "1995-1997 Isuzu MU 3.1DT Wizard Type E" represents a pivotal step in the evolution of Isuzu's MU series. This generation captures Isuzu's commitment to innovation, performance, and versatility, resulting in an SUV that remained relevant and appealing to drivers seeking a capable and dependable vehicle for a variety of driving scenarios.

Wheel Options

The "1995-1997 Isuzu MU 3.1DT Wizard Type E" offered a selection of wheel options that contributed to both its aesthetics and performance. These wheel choices were designed to cater to varying preferences and driving needs, enhancing the SUV's overall appeal.

The wheel options available for the Isuzu MU 3.1DT Wizard Type E were carefully selected to complement its design and enhance its performance capabilities. The SUV likely featured a standard set of wheels that were well-suited for everyday driving scenarios, providing a balance between comfort and stability.

In addition to the standard wheel option, the Isuzu MU 3.1DT Wizard Type E may have offered optional upgrades that included larger or more stylish wheels. These options allowed buyers to personalize their vehicles according to their preferences, giving the SUV a distinct look on the road.

The wheel dimensions, including tire size and rim specifications, were selected to optimize both ride quality and handling characteristics. These dimensions played a role in maintaining the vehicle's stability and ensuring responsive steering.

Whether drivers prioritized ruggedness, aesthetics, or a combination of both, the Isuzu MU 3.1DT Wizard Type E's wheel options aimed to meet those demands. The availability of multiple choices reflected Isuzu's commitment to offering a versatile SUV that catered to a diverse set of drivers seeking both performance and style.

Interior Features

The interior features of the "1995-1997 Isuzu MU 3.1DT Wizard Type E" were designed to provide comfort, convenience, and functionality for both the driver and passengers. These features aimed to enhance the overall driving experience and create an inviting environment within the SUV's cabin.

Inside the Isuzu MU 3.1DT Wizard Type E, occupants were welcomed by a range of amenities tailored to modern driving expectations. The presence of power windows allowed for easy control of window positions, while power steering contributed to effortless maneuverability, especially in urban environments.

A tachometer was thoughtfully integrated into the dashboard, providing the driver with crucial information about engine RPM. This feature assisted in optimizing gear changes and maintaining an efficient driving style.

Centralized door locks added an extra layer of convenience, enabling the driver to lock or unlock all doors with a single action. While keyless entry wasn't included in this model, the availability of centralized door locks offered practicality and security.

The Isuzu MU 3.1DT Wizard Type E featured an adjustable steering column, allowing the driver to customize their driving position for optimal comfort. The availability of an adjustable steering column, coupled with a comfortable driver's seat, contributed to an enjoyable and fatigue-free driving experience.

Additionally, the inclusion of reclining seats, both front and rear, added to the overall comfort of the interior. Passengers could adjust their seat positions to find the ideal balance between comfort and visibility.

While leather seats were not a part of this model's interior features, the Isuzu MU 3.1DT Wizard Type E prioritized a well-designed layout that maximized space and offered a pleasant driving environment.

In essence, the interior features of the Isuzu MU 3.1DT Wizard Type E were designed to create a comfortable and functional space for both driver and passengers. With features focused on convenience, comfort, and practicality, the SUV aimed to make every journey enjoyable and efficient.

Exterior Design

The exterior design of the "1995-1997 Isuzu MU 3.1DT Wizard Type E" showcased a blend of ruggedness, practicality, and style. Crafted to accommodate both urban commutes and off-road adventures, this SUV's design elements were carefully considered to create an appealing and functional vehicle.

From its front fascia to its rear end, the Isuzu MU 3.1DT Wizard Type E displayed a distinct character that set it apart. The SUV featured a sleek yet bold grille design, combining aesthetics with functionality by allowing proper airflow to the engine for optimal cooling.

The exterior dimensions of the Isuzu MU 3.1DT Wizard Type E were well-proportioned, ensuring a balanced stance on the road. The exterior length of 458.5 cm and width of 176.5 cm provided ample cabin space while maintaining a manageable size for urban driving and parking.

The exterior height of 175 cm contributed to the SUV's streamlined appearance, aiding in aerodynamics and fuel efficiency. Additionally, the SUV's exterior height and ground clearance of 20.5 cm allowed it to confidently navigate obstacles and uneven terrain.

Roof rails were a standard feature, enhancing the exterior's functionality by providing extra storage space for cargo or outdoor equipment. This design element reflected the SUV's versatility and suitability for various activities.

The Isuzu MU 3.1DT Wizard Type E's exterior design showcased its robustness through details such as wheel arches and protective moldings. These features not only added a rugged touch to the design but also offered practical protection against minor impacts and road debris.

The inclusion of back wipers and roof rails highlighted the SUV's attention to convenience and usability. These exterior design elements were chosen to enhance the overall driving experience, contributing to both aesthetics and functionality.

In summary, the "1995-1997 Isuzu MU 3.1DT Wizard Type E" embodied a purposeful exterior design that combined style with functionality. From its grille to its wheel arches, each element contributed to the SUV's distinctive character and its ability to confidently tackle diverse environments, making it a reliable choice for drivers seeking both form and function.

Safety Features

Safety features were a priority in the "1995-1997 Isuzu MU 3.1DT Wizard Type E," reflecting Isuzu's commitment to passenger protection and overall vehicle security. This SUV was equipped with a range of safety elements designed to enhance the safety of both the driver and passengers in various driving conditions.

The Isuzu MU 3.1DT Wizard Type E offered essential safety measures to mitigate the impact of collisions. The presence of side impact bars provided added protection to occupants in the event of a side impact collision. These bars were strategically integrated into the vehicle's structure to absorb and distribute impact forces, reducing the risk of injury.

The inclusion of a 3-point safety belt system further emphasized the SUV's dedication to passenger safety. This system ensured that all passengers were securely fastened and properly restrained, enhancing protection in the event of sudden stops or collisions.

The "1995-1997 Isuzu MU 3.1DT Wizard Type E" offered the option of driver and passenger airbags, which played a crucial role in minimizing injury during front-end collisions. These airbags rapidly inflated upon impact, creating a cushioning barrier between occupants and the vehicle's interior components.

The SUV's durable frame contributed to its overall safety profile. While specific details about the frame's construction may vary, its robust design was intended to absorb and disperse collision forces, reducing the impact transferred to occupants.

While not all safety features may have been standard across all trim levels, Isuzu ensured that the "1995-1997 Isuzu MU 3.1DT Wizard Type E" was equipped with the necessary safety measures to provide passengers with a secure and protected journey.

In conclusion, safety features in the "1995-1997 Isuzu MU 3.1DT Wizard Type E" demonstrated Isuzu's commitment to passenger well-being. The integration of features such as side impact bars, safety belt systems, and airbags underscored the SUV's dedication to enhancing safety and security for both the driver and passengers alike.

Conclusion

The "1995-1997 Isuzu MU 3.1DT Wizard Type E" encapsulates a blend of performance, versatility, and practicality within the realm of SUVs. From its robust and efficient engine to its thoughtful interior features, this vehicle was designed to meet the demands of a wide range of driving scenarios.

This SUV's 3.1-liter turbocharged diesel engine, characterized by the engine code "4JG2," delivered a balance of power and efficiency. The engine's torque output of 269.6 Nm and power output of 121.6 PS ensured responsiveness while maintaining fuel economy. This powertrain, coupled with a 4-speed automatic transmission, provided seamless gear shifts and efficient power delivery.

The Isuzu MU 3.1DT Wizard Type E's exterior design struck a balance between ruggedness and style. Its dimensions, including an exterior length of 458.5 cm and height of 175 cm, ensured both cabin space and aerodynamic efficiency. Roof rails and other design elements enhanced both aesthetics and functionality.

Inside, the SUV offered a range of interior features focused on comfort and convenience. Power windows, adjustable steering, and reclining seats added to the driving experience, while safety features like side impact bars and airbags emphasized passenger protection.

This model's safety measures, along with its robust construction, reflected Isuzu's dedication to passenger safety. The inclusion of airbags, safety belts, and side impact bars contributed to a secure driving environment.

In conclusion, the "1995-1997 Isuzu MU 3.1DT Wizard Type E" stands as a testament to Isuzu's commitment to producing a well-rounded SUV. With a focus on performance, safety, and versatility, this model was designed to cater to a diverse set of driving preferences and conditions, offering a reliable and capable option for those seeking both adventure and everyday practicality.

Frequently Asked Questions (FAQ) About the 1995-1997 Isuzu MU 3.1DT Wizard Type E